micromizerX7

[claud]

I bought 2 packs of these things, thinking it would be nice to trie it, plus they look cool with the light in it,
but the first pack leaked out the liquid as soon as I put it in,

I did put the rubber thingy on the bottom while filling it,
was very carefull filling it with a syringe, put the rubber driptip on it as soon as I filled it,
still...it all leaked out as soon as I took off the rubber thingy at the bottom

is there another way to trie this?
(before I trash the other pack I got)

Im kinda mad that it happened, I lost my e-liquid plus it ran all over my lavatube at my first trie

 

[Sicarius]

Did you fill it all the way ?

These don't like being filled too much.

 

[claud]

nope I filled it half or even less than that, I did fill up the first 1 all the way but I didnt want to lose the amount of liquid again, so I got smart the 2nd time

 

[claud]

besides the liquid running out, when I tried to get a vape out of the (almost empty) carto, it made a gurgling sound and e-liquid was in the driptip, pretty yukky

 

[Sicarius]

Sounds like it may be a batch that is not sealing properly.

 

[mafig]

I bought 2 packs of these things, thinking it would be nice to trie it, plus they look cool with the light in it,
but the first pack leaked out the liquid as soon as I put it in,

I did put the rubber thingy on the bottom while filling it,
was very carefull filling it with a syringe, put the rubber driptip on it as soon as I filled it,
still...it all leaked out as soon as I took off the rubber thingy at the bottom

is there another way to trie this?
(before I trash the other pack I got)

Im kinda mad that it happened, I lost my e-liquid plus it ran all over my lavatube at my first trie

hi claud & welcome to ECF..i also bought 2 pkts of 5..i had 2 leaky ones in 1 pkt but the 3 i did vape on were great,last over 3 weeks if all the 5/5 in the pkt were good,i would recommend but alas 3/5 i cannot as it becomes expensive to buy..i still got another pkt but will sideline until some1 can rectify the leak at the base of the tube(plastic)..i did sent back to the supplier and was told it is not leaking when tested & will replaced if i place another order with them..good customer service but i will not be buying micromizer but will trade on other accessories..happy vaping..regards mafig ps the best cartomizers is metal casing ones..if yr batteries(3.7V) can support LR 1.5 ohms & dual coil cartomizer 1.5 ohms the better,i use eGo variable voltage and vape at 3.7 or 4.2V..i highly recommend variable voltages eGo,mods or lavatube..so take out the guesswork which LR,SR & HR cartomizer U can use..eGo VV from 3.2V to 4.2V and compatible with LR 1.5 ohms to SD 3 ohms..lavatube 3V to 6V all cartos

 

[claud]

thanks for the reply mafig, I wont buy them again as well,
I was just wondering if there was some trick to using them that I didnt trie yet,
I will stick to my tanks and regular cartomizers from now on

 

[claud]

actually I had a 2nd pack of these things that came in shortly after the first, and although they are the exact same brand these dont have any problems at all,
so I am quessing the first pack must have just been all from a bad batch or something..
I still wont be buying them anymore, since theres no refund on them, and a whole pack of unusable micromizers was just a waste of money

 

[dormouse]

A general rule of thumb - clear stuff is a great attractant for new vapers but most clear things do not work consistently. Things crack, break, leak, fall apart. Learn to use normal cartomizers like Boge (3 ohm for slim 510, 3ohm or the hotter 2 ohm for 450mah+ fat battery and mod 510-threaded devices). Boge are the most popular cartomizers on 510 threaded stuff. Depend on Boge or similar non-clear cartomizers and consider most clear things to be a hobby.