Mini Nautilus watery taste, need help

[Topwater Elvis]

I treat them like a carto, I wouldn't dry burn a BVC, more chance of singeing the wicking material by overheating.

The only cleaning Ive been even 50% successful doing is Rinse / soak in PGA, pour out soak again, allow to evaporate/ dry, then prime as new.

If you did dry burn one then I'd try priming it, only thing that can happen is flooding.

While it is apart make sure all the gaskets are in place and in perfect shape, no nicks.

 

[DingerCPA]

I run my Nauti around 10W on my MVP. I'm also using the 1.8 BVC coils. 10W is about 4.24V for that coil. I run 50/50 light-colored juices, and I get plenty of flavor and vapor. I've been swapping coils about once a week-10 days. I don't dry-burn (tried it once, and results were nas-tay!)

 

[Archsage]

I treat them like a carto, I wouldn't dry burn a BVC, more chance of singeing the wicking material by overheating.

The only cleaning Ive been even 50% successful doing is Rinse / soak in PGA, pour out soak again, allow to evaporate/ dry, then prime as new.

If you did dry burn one then I'd try priming it, only thing that can happen is flooding.

While it is apart make sure all the gaskets are in place and in perfect shape, no nicks.

I don't think I fully understand what "Priming" is. Isn't that when you just let it soak into the atty while the atty is in the tank? And what's PGA?

 

[Frankieboy]

Are you using different juices? If you're only using one juice, perhaps you have vape tongue? I got this last week with one of my tobacco flavours that I'd been vaping for three or four days straight, it just started to taste like vapour with no flavour after a bit. Got some pineapple juice instead, switched to that for a day, then the tobacco got its flavour back when I returned to it.

 

[Topwater Elvis]

I don't think I fully understand what "Priming" is. Isn't that when you just let it soak into the atty while the atty is in the tank? And what's PGA?

You can put your cursor on the underlined abbreviation it it will tell you what it means. PGA = pure grain alcohol / everclear / moonshine.

You drip 2 -3 drops of juice directly on the screen inside the head of a bvc it will soak in, then fill tank, screw top & bottom pieces together, let is sit a up right a few minutes, then inhale through it without pressing the fire button 2 or 3 times, you should see bubbles coming out of the holes in the side of the head.

 

[Archsage]

Ok, thank you for all the information!