Mixing NT juices

Status
Not open for further replies.

ReigntheGamer

Account closed on request
ECF Veteran
Oct 14, 2014
5,979
26,132
I changed out the tank it was in. Put it in a mini PT3 with a pretty good coil in it. It's at 2.1 ohms and 9 watts. Tons of vapor plus better taste than before. I think I will take your suggestion to heart and put it away for the night. I really would love to taste this.

I've noticed it really pops in the morning after I have been vaping The Virus/Wakonda with my coffee and then I would switch to TheBird and water. That first vape off of it after something that is sooo different makes the flavor very noticeable.
 

scratchtheweasel

Super Member
ECF Veteran
Verified Member
Jul 27, 2014
927
4,302
Pocono PA
I can't speak for the Nauti's, but Kanger tanks with the v1 BDC should handle the bird OK. A rebuild with cotton wick will work even better. I would be more skeptical about the Kanger v2 BDC's given that they have much smaller juice inlets.

Generally speaking maxvg juice pairs best with a dripper. This is where my maxvg goes and it tells me that it's very happy there. ;)
 

LynnNC

Resting In Peace
ECF Veteran
Verified Member
Sep 1, 2014
10,347
88,071
NC
I put the Hummingbird away last night and focused on something else. I revisited it today and y'all were right. Today is a different day it's good...a delicate lychee taste. But...I'm so not ready for NZ. I've been vaping NZ almost all day and it's reached a point where I'm seriously considering going next door and bumming a Newport even though I don't like menthol. I'm putting the HB away and grabbing some 12mg Nic I've got. Thanks for everyone's' help!
 

XJ-linux

Super Member
ECF Veteran
Verified Member
Nov 28, 2013
399
9,441
For what it's worth, I vape 9mg Hummingbird as an ADV. It's a mix if 12mg and 6mg Hummingbird. Anyhow, I use a DNA30 and a Spheroid. The coil is 2mm and 1.3 ohms of 5 wraps of 30ga with a cotton wick. I run it at 3.9V/11.5W. The key, for me, with Hummingbird, was going to a smaller 2mm coil and cotton. I did 28ga 3mm coils and silica wick for a while and just didn't get much out of it. 28ga didn't heat up quite right for MAXVG but 30 was spot on. 3mm was too big and I got gurgling sometimes, but 2mm worked well in letting cotton do the work of wicking the juice properly while making a coil small enough to heat quickly and completely. Something about MAXVG takes a little extra playing around with to find the sweet spot. Anyhow, once I got the wicking figured out, Hummingbird really came alive and became a great ADV. It's tasty once you get a good build and then know what to "taste for", and light enough to where you don't burn out your taste buds after a day of heavy chain vaping. I too tried it in a tank (Protank II with OEM 1.8 ohm coils) and it burnt quickly and clogged up even more quickly. I will probably rebuild some of those coils over the winter with cotton as it's tough to beat a PT II for quick coil changes.
 

Kent Brooks

Resting In Peace
ECF Veteran
Apr 24, 2013
17,678
91,969
48
Omaha, Nebraska, United States
www.nicoticket.com
In Band Camp, you are correct, it is 4mg
In PBC, you have 6mg after mixing the 2 bottles. I would mix in the empty 30ml bottle. If you need to reduce the nic down to 4, you would need to add 15ml more NZ to the 30.

Thank you for stepping up and helping with this!! XOXO
 

ReigntheGamer

Account closed on request
ECF Veteran
Oct 14, 2014
5,979
26,132
Been revisiting The Bird for the first time since I posted about it awhile back, definitely getting the cranberry more than last time. The clouds are still ridiculous I love this stuff in my mech, going to carry it to the Vape Summit this weekend and make some fog banks of sweet smelling goodness. Only downside is I have to vape this stuff on the back porch or in the garage don't want to smog the puppies. :D
 
Status
Not open for further replies.

Users who are viewing this thread