I had an IGO-F collecting dust,so decided to mod it for my new Grand. The IGO-F is a rda with a small (maybe .5ml) reservoir under the build deck. The build deck has 2 holes in it for wick and drainage. I got it awhile back and did not use it much as it ran dry too often.
I cut a groove using my Dremel in the center firing pin. This allows the juice the fill the bottom reservoir, and wet the wick. Big thanks to all the others who shared their experience, and inspired my internal "fiddler"
It is a pretty tight build area, since this was originally designed for ego batteries. This is at 1.5 ohms with cotton wick, and the flavor seems pretty concentrated. I had previously drilled the air hole to 1/16".
I would not run out and buy one of these over one of the others mentioned, but I think I got it for $9. Looks pretty tight, and works ok. You have to really squonk to fill the bottom reservoir, but flavor is good due to the small cap.
I cut a groove using my Dremel in the center firing pin. This allows the juice the fill the bottom reservoir, and wet the wick. Big thanks to all the others who shared their experience, and inspired my internal "fiddler"
It is a pretty tight build area, since this was originally designed for ego batteries. This is at 1.5 ohms with cotton wick, and the flavor seems pretty concentrated. I had previously drilled the air hole to 1/16".
I would not run out and buy one of these over one of the others mentioned, but I think I got it for $9. Looks pretty tight, and works ok. You have to really squonk to fill the bottom reservoir, but flavor is good due to the small cap.
