Does anyone know of any vendor that sells mods in Canada. I am looking for either a 3.7v or a VV for my dual coil cartomizers. I am not looking to break the bank, not looking for anything super fancy, just something that works and doesnt look to funky, LOL. If anyone knows where I could find one in Canada (I am not interested in ordering state side). Any help is appreciated, please let me know.
Mods in Canada
- Thread starter PartyNaked
- Start date
- th_trl_thread_readers 0
-
- Tags
- altsmoke revolution
- Status
Happy Vaper - Canada Electronic Cigarettes and E-Liquid, DIY Concentrated Flavorings! carries the Precise line and the Darwin.
Premium Electronic Cigarette Kits, Juice + Supplies carries the Silver Bullet, BB, Alpha and Omega.
Don't know who else (haven't looked that hard).
Premium Electronic Cigarette Kits, Juice + Supplies carries the Silver Bullet, BB, Alpha and Omega.
Don't know who else (haven't looked that hard).
Happy Vaper also has the revolution 2.1 juice feeder (3.7) for 59.99
Nicfitnation has the rev2 for 59.97 as well
Nicfitnation has the rev2 for 59.97 as well
I have been looking at the Revolution V2.1 at HappyVapor.....reviews dont seem that great...anyone actually have one...and would you recommend it for a good commercial mod for dual coil cartomizers? I also use LR510 attys...do they work ok with attys?
If you're on a budget, stalk the classifieds section. I picked up a Sabre Variable Volt, plus batteries, plus charger, cartos and some juice, for $70 shipped. Hell of a deal.
thanks for all the help so far.....classifieds have been stale lately, havent seen anything......so mopar, u like the revolution? is it hard to use with lr atty.....i know it should be good with cartos, just wondering about not flooding attys
I don't have one but have used it. A long time big wig vaper(Rob) in the community swore by it(even though it was covered in juice and a big leaky mess when he took it out) so if you wanna go on the cheap? For a bottom feed 3.7V can't be that bad? or can it
Yeah, a lot of people seem to complain that it leaks.... but it is a great price, and looks nice enough.
Even better, you can get a Saber Touch directly from VaporMoon.com, which comes with a factory warranty.
Many specials, check them out:
Huge Savings Specials!
Shipping is reasonable, and as stated, customs will not touch it. My Reo Grand arrived in 4 business days from Maine.
Many specials, check them out:
Huge Savings Specials!
Shipping is reasonable, and as stated, customs will not touch it. My Reo Grand arrived in 4 business days from Maine.
I heard the some people complaining that they had to lick their finger or something to get it to work depending on environmental factors. If you grab one make sure that problem is fixed.
I have a Sabre VV, and I've never had to lick my fingers. Sometimes, usually when my hands are dry and have been cleaned moments earlier, I have to apply extra pressure, but that's it.
The Touch is conductive, and a connection between the button and the end caps is needed to fire the atty. If you get a power coat, it means you have to touch both the button and the end cap. Not a problem when holding it in your hand. Anyways, that's why sometimes it won't fire. Dry, clean hands don't have much conductivity. Salty, sweaty hands do
The Touch is conductive, and a connection between the button and the end caps is needed to fire the atty. If you get a power coat, it means you have to touch both the button and the end cap. Not a problem when holding it in your hand. Anyways, that's why sometimes it won't fire. Dry, clean hands don't have much conductivity. Salty, sweaty hands do
Personally, my ultimate fave mod, that I actually got from a sweet sweet man as a gift, called the Omega is my most fave device out of my whole family of pv's. Now with that being said, it is at altsmoke right now getting fixed..needs a new pin or somthing. But I use the 3.7v batts and 2-3v and then got the hv carto's from mad vapes, and just loved it. Here is where you can get it. Omega
I got the baby brother to the Omega, the Alpha and that spring motion to fire up the atty is fantastic!
I have a Sabre VV, and I've never had to lick my fingers. Sometimes, usually when my hands are dry and have been cleaned moments earlier, I have to apply extra pressure, but that's it.
The Touch is conductive, and a connection between the button and the end caps is needed to fire the atty. If you get a power coat, it means you have to touch both the button and the end cap. Not a problem when holding it in your hand. Anyways, that's why sometimes it won't fire. Dry, clean hands don't have much conductivity. Salty, sweaty hands do
Lol, I wouldn't have a problem with it then. It may have just been the first batch or something. Enough that people complained but if all you have to do is press a little harder when clean... just don't wash your hands!
The leak in the rev 2 is the top of the feed bottle. there is a seam just before the needle. I had a leak and took mine out and pressure tested and found the leak. I spread some crazy glue on the seam and fixed the leak. an atty will work but there is no juice cup so you have to be careful of flooding is all.
I gave mine away cuz I ripped a wire off the pc board cleaning it. since I have a grand coming I gave it to katz to try a bottom feeder. she's pretty handy with tools and such and solders. all I have left is my 150/300 watt gun and too big to solder on a pc board (I just solder batteries nowadays and need mo power)
I gave mine away cuz I ripped a wire off the pc board cleaning it. since I have a grand coming I gave it to katz to try a bottom feeder. she's pretty handy with tools and such and solders. all I have left is my 150/300 watt gun and too big to solder on a pc board (I just solder batteries nowadays and need mo power)
- Status
