MOUTH BURNING

Status
Not open for further replies.

peety1

Full Member
Sep 11, 2013
69
28
Ireland
Just a question.Have been vaping for quite a while now and have been really enjoying and getting more into rebuildig.I had a problem just recently when I had a rebuild on my mini subtank at 0.5 ohms,normally 1.3 ohms,and I had a liquid from a new supplier.The top of my mouth has really started to burn so much my teeth hurt has anyone else ever had this?
 

happytree

Full Member
Nov 19, 2015
35
13
30
wow, i've never had that issue... Try drinking lots of water. Most likely some juice popped right into the top of your mouth to cause that burning sensation. What wattage are you using for 0.5 ohm? At a 1.3 ohm range, I've never been anywhere above 15 watts. At a 0.5 ohm range, my wattage is most definitely above 20. Your coil positioning would also affect whether the juice would pop or not. Try rebuilding another coil at 0.5 ohms, and make sure the coil is sitting half way of the screws (half of the coil above the screws, half of the coil below).
 

happytree

Full Member
Nov 19, 2015
35
13
30
its the liquid toughing my mouth then not the vapor thats giving a problem?
Do you get a taste of the juice or the vapor? You can definitely tell the difference if its in your mouth. Most juices typically don't have that problem, its typically the build itself where the problem lies. Low wattages on a low ohm build have the possibility of not being able to vaporize the juice, but instead boiling it, thus the pop and burning sensation
 

mattiem

ECF Guru
ECF Veteran
Verified Member
its the liquid toughing my mouth then not the vapor thats giving a problem?
No one but you can actually answer that question. Since you changed 2 things you don't know if it is the lower ohm coil or the new e-liquid. It is possible something in the new e-liquid isn't agreeing with you or the new coil is running to hot for you. A bit of trial and error does seem to be in order to see if either of the changes is causing your problem.
 
Status
Not open for further replies.

Users who are viewing this thread