Mouthpiece question

[trintek]

well, i received a reply, it looks like they make it for a mini/supermini only, and they don't sell it without the kit :/ the photo of the mouthpiece seems to be a slightly smaller diameter mouthpiece of the normal hard plastic with a silicone or similar sleeve of about 1mm thickness. not what i was expecting from earlier product photos, i guess they moved away from the longer ones they used to have that used a regular mouthpiece with a silicone/rubber wrapped filter tip.

on the plus side, it doesn't look like it would be too hard to make a silicon sleeve to go over a regular mouthpiece.

 

[chuckie]

Thank u for the update,I would have liked to have been able to get some 901"s without buying a whole kit,still you"re effort is much appreciated....Chuck

 

[DJGoogone]

So I take it noone has found a soft tip for a 901 yet?

 

[sMuCk_fOg]

That I'm the ONLY one here who doesn't use a mouthpiece at all?
I only have 901's (about 10 of them) and I could never get the wadding to actually feed the atomizer, Everytime I used my 901 I would drip and top off the cart. I would get a few good hits , then I would start tasting the material in the atomizer burn so I would drip again and then go to top off my cart and it would still be full. EVERYTIME! So I just did away with the carts altogether, I drip about 3 drops on the atomizer and puff away on a few hits with the 901 angeled down slightly,then drip again. Works for me and so far I've never had an atomizer fail.

 

[Brian]

well, i received a reply, it looks like they make it for a mini/supermini only, and they don't sell it without the kit :/ the photo of the mouthpiece seems to be a slightly smaller diameter mouthpiece of the normal hard plastic with a silicone or similar sleeve of about 1mm thickness. not what i was expecting from earlier product photos, i guess they moved away from the longer ones they used to have that used a regular mouthpiece with a silicone/rubber wrapped filter tip.

on the plus side, it doesn't look like it would be too hard to make a silicon sleeve to go over a regular mouthpiece.

Thanks Trintek, I might have to give it a try... I appreciate all your help

 

[joniliff]

YEARS ago (I'm 72) when I was seriously smoking pipes, I found some soft rubber tips, that fit around the mouthpiece of my pipes. They were about 1/2 inch long, and I think I got them at a local "Tinder Box". Try any of your local tobacco shops.

 

[chuckie]

PIPE MOUTHPIECE PROTECTION: ''SOFTY BITS'' A BUCK EACH - eBay (item 320260724600 end time May-02-09 19:48:51 PDT)
heres some tips that might be of some interest, tell what you think about them.
dont know if they will fit on 901s or not.

 

[Mary Kay]

Does any one make a round cart as opposed to the cigarillo type tip for a 901. Soft would be a great invention too!
Mary

 

[sMuCk_fOg]

Does any one make a round cart as opposed to the cigarillo type tip for a 901. Soft would be a great invention too!
Mary

The original carts for the 901 were round...I ordered a couple of "original" dse 901's from Eastmall (David Yang) and received the round carts with them,For me they work 100 % better than the thin tipped carts.
Janty Dura C carts are also fullsized and round and they hold much more liquid.I think some have a problem with the fullsized Round carts because they feel so big in ones mouth...Luckily for me I have a really BIG mouth lol. Good luck!

 

[Mary Kay]

OK! Thanks. I will try to contact David at East mall and see what he can do for me. Hubby isn't fond of the flat tipped.
Mary

 

[Gearwork]

I've been planning on getting some Plasti Dip for my 801 mouthpieces. It's a air dry synthetic rubber you can get it at a hardware store and it's for dipping tool handles in.

 

[rinkusu]

I personally can't stand these soft and pliable mouthpieces for the 801. When you go hands-free with the 801 it droops down. I like the hard plastic mouthpiece.

Anyone know of where to get the hard plastic mouthpieces, other than bestecig.com?

 

[solonguniverse]

I personally can't stand these soft and pliable mouthpieces for the 801. When you go hands-free with the 801 it droops down. I like the hard plastic mouthpiece.

The last time I tried to go hands-free I dropped my e-cig down the stairs.

 

[rinkusu]

The last time I tried to go hands-free I dropped my e-cig down the stairs.

Ouch! I clench my teeth pretty tightly when I am going hands free. Hasn't dropped yet.

 

[brialeeanna20]

would anyone be willing to send me a soft cart to try!! i have tons of hard ones from bestecig that i could send you in return we would be able to put them in a reg envlope and just put a stamp on it