mvp 2.0 issue

[jerseyman32]

Been using mine avwhile, lately i have to fiddle around with the 510 pin to hey it yo reaf the correct ohms on my atty its either reads non or some where in the3's anyway to fix this besides messin with the pin? Also doesnt feel like its putting out the power it once did

 

[roxynoodle]

Very gently pry up the pin a little with a precision screwdriver.

Or add a circuit board spacer from mad vapes.

A 510 to 510 adapter might help.

Or replace the 510, which is more work.

 

[jerseyman32]

I have a couple 510 to 510 adapters ill try that first, prob tey it on my istick too, gonna look funny thou

 

[Marcus1970]

I have a couple 510 to 510 adapters ill try that first, prob tey it on my istick too, gonna look funny thou

I'm having the same problem let me know if the adaptor works.Then I'll get one,I don't want to keep pull the pin up Cheers

 

[roxynoodle]

Yeah, the pin may drop down again. Be careful screwing on your attys. Just til snug. Don't go all man on your mods

 

[jerseyman32]

Lol ok roxy , i wont caveman my atty.....510 ADAPTER WORKED!!! Looks a lil silly but it works

 

[Marcus1970]

Mine seems to happen when I put a kanger emow tank on.If I change to an i30 or a ets, it's ok as soon as I put the mow tank non comes up

 

[James Laudano]

Been using mine avwhile, lately i have to fiddle around with the 510 pin to hey it yo reaf the correct ohms on my atty its either reads non or some where in the3's anyway to fix this besides messin with the pin? Also doesnt feel like its putting out the power it once did

I have had this same issue from time to time. In my case it is because the center pins and rubber grommets on my rebuilt heads get pushed I a little, in which I just pull back on the center pin gently and screw the atty back on until it makes contact and reads properly. Unfortunately the grommets become worn out after many rebuilds and have to be replaced.

 

[Danbrooks2k]

This is a common problem with the deep well of the MVP not making proper contact.

I just filed down the top of the 510 connection with a dremel, problem solved forever.

I am not saying to do this... Just saying it worked for me and I havent had an issue in over a year.

 

[vincom]

or you can replace the 510 with a spring loaded fatdaddy 510, + no more mucked up threads which is what i had
http://www.e-cigarette-forum.com/fo...dapter-replacement-w-fatdaddy-510-w-pics.html