MVP Help!

[FatJanky]

So my MVP has been having some issues and I'm hoping you can help. So it's started a while ago but where the tank screws on, like the unit itself, spins. So when the tank is fully screwed on it still spins on the unit then locks itself into place. Now although I knew it was a problem it never really affected anything. Now it seems like when the tank and the unit are locked in it won't heat up. So I backed it off a little and now it works. But I can't keep it from spins when it's at the point of the device firing. Anyone else experience this, and is there any helpful hints or advice? Oh and I've tried more than 1 head. TIA

 

[Jazzi Mike]

Sometimes, I have to use 510-510 adapters on my MVP. Even though it is supposed to be 510/ego threaded, I find some atomizers/etc... not working on it.

I still don't understand what your issue is though. Maybe a pic?

 

[jefsview]

Are you saying that your 510 connection of the MVP spins around?

Or are your saying your clearomizer/cartomizer/tanks spins around?

 

[FatJanky]

The 510 connection on the MVP.

 

[jefsview]

The 510 connection on the MVP.

Well, that's not good.

Did you drop it, or did it just become loose?

I'd contact the vendor you purchased it from if it's been less than 90 days.

 

[rogergendron1]

If u got it from fasttech its probably a knokoff and inokin will not repair or fix or warrenty anything from fast tech. As they are not true innokin products

i have heard this issue 2-3 times before but only from people who bought from fast tech

if your bat is heating up definitely do not use it the mvp has a li ion batery that will explode if over charged or shorted

i bought mine from a trusted vendor a b&m a year ago and its still going strong, never had one problem.

 

[FatJanky]

Ya I never dropped it, but it has been less than 90 days and I will do that. Thanks hopefully place I bought it from is gonna be nice about it.

 

[FatJanky]

I'm pretty positive it's not a knock off, got it from a reliable local vape retailer. I'm gonna give them a call tomorrow.But for now I have fine sharpie marks for the exact point on which it fires up. Gotta make it through work tomorrow still lol

 

[Crystal Gravy]

If it spins too much you can detach the wires from inside. I have fixed about three of these,

 

[FatJanky]

Ya I figured that out but I can't get the volt up volt down buttons pushed down together to remove the outside of the casing. Sausage fingers lol