My cheap version of the ''Line"

[bohoo]

Like WillyB said, i couldn't get the guts out until i actually cut the skirt. The skirt is identical to the ego tank A and B ones. Heck the entire bottom is identical.
Over here they are beeing advertised as :

Giantomizor ego-V F1
3.5 ml
801 flat tip
Length 59 mm (91 mm with the cap on)
Diameter 14 mm
Resistance 2.7 ohms.

I never thought there might be other models out there as these were the only ones i could find here.

 

[WillyB]

I am totally confused, if anyone find the ones bohoo used please post the link. Thanks

I am going to mod one of mine with an ego adapter.

Damn, haven't I beat this dead horse to a pulp by now?

I posted the link and the pic here.

http://www.e-cigarette-forum.com/forum/modding-forum/243494-my-cheap-version-line-7.html#post4841128

Again.

eGo CE2 Giantomizer F1 with Pen Cap

And didn't you say that 3.7ml was too much liquid??????

 

[bohoo]

Love you all

 

[otrem]

ego-w... windows ..stands for ego with atty that has windows.
ego-c....changeable..where the coil part of atty can be changed like a cartridge.

 

[asdaq]

Cheers otrem, that makes some sense, they do have windows. It's nice to get some pre-threaded parts, I wonder if the ego-c could be modded into a rebuildable atty.

 

[Teach]

I am totally confused, if anyone find the ones bohoo used please post the link. Thanks

I am going to mod one of mine with an ego adapter.

I've been to a lot of sites, but found nothing like that. We've got the A, B, C, and G... could be one of the missing D, E, Fs, but I'm guessing it may be one of the knockoff F1s MicroCig is talking about.

Merry Christmas all!

 

[BJ43]

Damn, haven't I beat this dead horse to a pulp by now?

I posted the link and the pic here.

http://www.e-cigarette-forum.com/forum/modding-forum/243494-my-cheap-version-line-7.html#post4841128

Again.

eGo CE2 Giantomizer F1 with Pen Cap

And didn't you say that 3.7ml was too much liquid??????

Got these on order, should be here in a few days. Thanks again WillyB and a Merry Chistmas to you..

 

[BJ43]

These are the cartridges from the two sources i purchased. One is more transparent than the other and has more hash marks on the bottom, it also fits loosely in the ss sleeve. Neither have the 510 connecter and both have ego threads.

 

[Teach]

These are the cartridges from the two sources i purchased. One is more transparent than the other and has more hash marks on the bottom, it also fits loosely in the ss sleeve. Neither have the 510 connecter and both have ego threads.

I see what you mean. They don't appear to be from the same run. The air holes appear to be at different levels too (although that may be the pic.) I'll be opening one of mine from microcig - we'll see what it looks like.

 

[BJ43]

Yes the air holes are different and the center white cover is longer on one.

 

[Teach]

Well boogar... I took a couple apart to cut the bottom down to standard 510 and forgot to drop the inner base out of one to see how it compared. I'll set one out to do that tomorrow.

 

[BJ43]

I finally popped one and here it is broken apart. It has the ego threads so I am going to mod it and use a ego to 510 adapter.

http://i1187.photobucket.com/albums/z391/bj431/IMG_1078.jpg

 

[BJ43]

http://i1187.photobucket.com/albums/z391/bj431/IMG_1080.jpg

I may drill and leave the ceramic cup..

 

[BJ43]

The A2 sleeve fits the threads of the "cheap line"and has the air hole...

http://i1187.photobucket.com/albums/z391/bj431/IMG_1084.jpg

 

[urquidezj]

Very nice progress in this thread if there is enough room, you guys might wanna try 16 g tubing drill it to. 052 and tap it to 0-80 this will get you screw posts might order one to see of its possible.

 

[BJ43]

I have some mini screw connecters from RC smaller than on the A2, but it is pretty tight. The sleeve reduces quite a bit at the threads. My 69 year old fingers aren't the same as they used to be, actually nothing is the same..lol

 

[urquidezj]

Hahaha ill see when I order one and mod it should be relatively easy.

 

[Teach]

The A2 sleeve fits the threads of the "cheap line"and has the air hole...

http://i1187.photobucket.com/albums/z391/bj431/IMG_1084.jpg

Looking great BJ!



Finally got the base out... very different from the one you have. Hoping to get in the shop and get some parts cut tomorrow.

 

[bohoo]

Teach, that base is exactly what i had. A 510 connector that will fit back in the plastic tube perfectly

 

[BJ43]

http://i1187.photobucket.com/albums/z391/bj431/IMG_1086.jpg
http://i1187.photobucket.com/albums/z391/bj431/IMG_1087.jpg
http://i1187.photobucket.com/albums/z391/bj431/IMG_1090.jpg

Decided to take urquidezj's advice and went with the mini bolts. Hand shaped a teflon piece from a 3/4"rod.