My eGo C Twist and Vision Spinner VV

[Frakenvapour]

Hey guys, iv had my eGo twist 1000mah for a few weeks now and was absolutely pleased with its performance. I vape a lot and wanted a better back up than my Blu starter kit. Like many other peers on this forum i am becoming a vapoholic and have no desire to return to analogs. I decided to go with a 1300 fat black Vision Spinner for a back up, gotvapes was out of 1000mah twist in certain colors. I was not going to roll with a pink one lol. The Vision spinner was offered in a 1300mah, slightly shorter than a twist 1000, although thicker and had easier to read vv marks. Other than that pretty much comparable to each other. I received the Spinner today and right away liked the total height of the setup. Things i was not pleased with, threads seamed a lot more fragile than my twist. I even had difficulty getting it to contact my eGo charger properly. The performance is still great like my twist, i am just dissapointed in the thread quality. I hoping others will chime in and add comments/experience with their Spinners. On my twist i am currently vaping FLUX urban tropic, on the spinner FLUX rootbear floot.

 

[junkman]

How long does the 1300 last?

 

[ninjuh]

Hmm first I've heard about this.. interesting

 

[Frakenvapour]

Junkman- I just recieved it yesterday afternoon. Still vaping on it after a full charge.
ninjuh- Maybe it was just tapped slighty off from the manufacture, we will see if others experience this.

 

[junkman]

I get about 6 1/2 hours if I use it exclusively, just wondering if mine is an anomaly. Seems too die too soon.

 

[Kemosabe]

im intersted to hear more reports about the threads too.

 

[Frakenvapour]

I have been vaping for about a day and a half total now. I used almost 5.0ml of juice so far and the vision spinner1300 mah is so far out lasting my eGo twist 1000mah. You would assume so being a larger mah battery. Junkman- iv heard of others getting about the same amount of time out of their 1300's. Mine is holding up to its expectations so far. Try a full charge and see what happens, did you have problems with the thread on yours?

 

[Amyalex]

Hello. I got the spinner 1300mah awhile ago and after full charge it would blink quickly Beverly time I vaped. I tested on my ego tanks, vivi nova and mini vivi. Same thing. I ordered from gotvapes. In same order I received a wall wart that fell apart (stuck to wall outlet when I unplugged it). So I returned both to gotvapes (after opening ticket and they told me to). And now gotvapes is saying wall wart wasn't in package (that I packed and I even sent them pic of wall wart) and asking if I fully charged the battery before using. And now they're saying they didn't promise to do anything. Why would I have mailed it to them? Was within 7 days btw.

Sorry for rambling!! Guess I have 2 questions:
1. Ahead anyone else had problems like this with gotvapes CS?
2. More important! Should I try the twist instead of spinner? I really liked the spinner for the first few days it seemed to work fine. But then the flashing and weak vape (like dying battery) on the tanks/attys i used. So I'm wondering if it's just a weaker connection..? Obviously I don't know what I'm talking about. I just don't know if I shoukd try another spinner or go for a twist.

Thanks!!

 

[mrwilliams2]

This is my 2nd day with my new 1300 mah Spinner. I vaped it exclusively yesterday starting at 7am. It was still going when I put it on the charger last night at 11:30pm. I was using a 2.4ohm Vivi Nova Mini vaping a around 4.5 volts all day.

I haven't noticed the threads being fragile at all, but the are slightly uneven... everything screws in just fine, but you can lay it on its side and get a very slight wobble when you roll it. Not a big deal to me as this thing vapes like beast!

I popped a 1.7ohm CCV Resurrector cartomizer in it this morning and it makes plumes of warm vapor at 3.3 volts.

 

[xMackx]

I have been wondering if the Vision spinner is better or worse than the ego twist. I myself only have the ego twist 1000mah, when I first got it I could get 9 vaping hours off it. Now that I have had it for a month I get about 6 hours off a charge.

I would be interested in seeing what you guys have to say about both the twist and the spinner after a couple weeks of use (after the batteries settle in from use).

 

[Gummy Bare]

Things i was not pleased with, threads seamed a lot more fragile than my twist. I even had difficulty getting it to contact my eGo charger properly.

I had the exact same issue with the Vision Spinner threading. It doesn’t like my ego charger much; I kinda have to fiddle with it at times to get a good connection. And when using clearomizers that connect to the outside ego threading, it’s super wobbly like its jumping or popping off threads. I can screw it down to a point where it doesn’t wobble anymore, but then it almost completely closes off the air way… so it’s like sucking on a coke bottle. I need to try some tanks that work on the inside 510 threading and see if that’s any better. The outside threading is complete junk though! Maybe some of that white thin PCV pipe threading tape stuff (sorry, don’t know what it’s called) would help it out a bit.

IMO the Ego Twist is defiantly a better product. I’m new to the whole vaping game, but I’ve been buying and reading a lot very quickly. Got my Ego Twist and Vision Spinner on the same day…. Wish I would have just got 2 ego twists.

 

[junkman]

Just checking back in.

My threads seem fine. Battery life is ok on my 1300 spinner. Not as long as I would like but it is what it is.

I haven't been using it all that much, have been using the 14500 vv mod instead because it seem to hit stronger/more consistent and has a digital screen. Only use the spinner when I am out of batteries for the 14500, which does happen because I only get about 2 hours max out of the 14500.