My experience with the "washer" 510 atty

[Turco Chips]

So - I was quite suprised to see that the attys I received a couple of weeks ago looked different on the inside that the ones that came with my 510.

The bridge was wider and fatter, and there was a metal washer over the ceramic oval piece.

First - my cart was super loose.....hmmm....So I searched the forum and scored the cart where it inserts into the atty - That fixed my fitting issue.

Now - I am super happy with the way this thing functions.... It sizzles very quickly and gives a great draw....great vapor, and great taste. I will be ordering more (3 more arriving today per the tracking info) - I pay about 2 bucks less than the official njoy atty.


Experiences for you folks...good or bad? As stated, I'm very happy with the way they work. FYI, I am vaping with an XHALER.


TC

 

[Dale.s]

Where did you get this atty from? It sounds like the "un official" as is, not Joye attys that where floating around a few months ago. Ive been wanting to get them but everybody stopped selling them when it came out that they where not joye products.

 

[Liscab]

I got 2 some while ago and they came with autocut off batteries, they read 3.7 ohms never liked them.

 

[mergryphon]

VaporKings carries the SLB joye 510 atty. Its the larger bridge with the metal washer.

I also prefer these at higher voltage. Not sure why, I think they run a little cooler than the OEM, better flavor to my dead taste buds and plumes.

 

[j0ker]

Those are the DSE L2 510 atties. I have one and I like it. It works very well. Where did you buy yours if you don't mind me asking?


BTW...Search the forum for L2, you'll find several discussions about them.

 

[Turco Chips]

I got mine from Electronic-Ash an approved supplier here at ECF--> Zen Cart!, The Art of E-commerce




TC

 

[Turco Chips]

BTW, Thanks for the "L2" info, j0ker!!

 

[Turco Chips]

Well...just got home from a employee party at Fox and Hound. My pkg arrived, but this time I got regular NJoy 510 attys... The "washer" ones work GREAT with my xhaler....I want more of 'em.....they stay cooler and vape great at 5+ volts.


TC

 

[freeman dyson]

that was my main concern about ordering non joye atties for my 510. loose carts. i also heard they had other problems and so do the batteries.

 

[Turco Chips]

The loose cart issue was easily fixed...took all of 20 seconds or so. I really want mmore of these!


TC

 

[Mr Sinister]

Loose carts and chipping paint are the only problems I had with the SLB atomizers. They perform great. I can't speak for the batteries because I don't use stock.

 

[Cherice]

Vapor Country sells these as well. Work great on HV

 

[Turco Chips]

Thanks Cherice! I do hope that Taras at electronic-ash gets more because I like his free priority shipping with a purchase over $14.99....I've emailed him to see when he will have more.

Yes - these attys are heavenly at higher voltages.

TC

 

[Clem68W]

I'm relatively new to this, and don't have high voltage. Apples to apples compared to the regular 510 atomizers I also have, they don't work so well with the "stock" batteries, manual or otherwise, that I'm using. It makes sense that they'd work better with high voltage. They don't work very well otherwise. It's harder to pull good amounts of vapor, and meh, everything else suffers for it, except that they don't get hot.

 

[kgokal]

I got some washer type atty's from Nicotine NIrvana.
They do have a washer in there, but the bridge looks narrower.

And one thing i notice is it "pops" a lil while vaping?

Are these better for USB PT?

 

[The Yeti]

The loose cart issue was easily fixed...took all of 20 seconds or so. I really want mmore of these!


TC

I know this is an old thread, but can anyone point my in the direction of this loose cart fix????

 

[BradSmith]

I got two with a 510 kit from China over three months ago. They are troopers I have not lost one yet. I removed the entire bridge and just drip them I love them because they stay really clean that way. I can change flavors without much remnant from the last flavor. I mean think about it, there is much less mesh for flavors to get stuck on. I would buy more if I new for sure that I was going to get the ones with the washer, in fact I would even pay a buck more for them.

 

[redgirl]

I got two with a 510 kit from China over three months ago. They are troopers I have not lost one yet. I removed the entire bridge and just drip them I love them because they stay really clean that way. I can change flavors without much remnant from the last flavor. I mean think about it, there is much less mesh for flavors to get stuck on. I would buy more if I new for sure that I was going to get the ones with the washer, in fact I would even pay a buck more for them.

You can buy them at cloudsofvapor or madvapes. I got some and tried them at 5V and don't like them as much as Joye 510s. I haven't tried to take the wicking out. Does that make much difference in throat hit & flavor?

 

[BradSmith]

You can buy them at cloudsofvapor or madvapes. I got some and tried them at 5V and don't like them as much as Joye 510s. I haven't tried to take the wicking out. Does that make much difference in throat hit & flavor?

thanks I should have looked around on the MadVapes site I just got their 5 volt passthrough and I love it with the washer 510.

I am only dripping so on most of my atties I have removed both the bridge and the wick. So I am dripping straight onto the coil. It's a warmer vape and cleaner tasting too. It makes sense as you have the liquid getting heated directly at the coil and no mesh to trap burnt flavors. I haven't had one die on me yet and it's been a month or so (and this was done on two month old atties). I did this first with one that I just couldn't get the flavor out of. Now it rocks, no more bad flavor and boy oh boy with the five volt and dripping straight onto the coil it is putting out a ton of vapor. In fact I start out the day using a 3.7 until I am warmed up, otherwise I end up coughing.

If your interested in removing the bridge there is a video around that is great. But if you can't find it PM me and I'll do my best to talk you through it. It's really simple but there are a few precautions to take.

 

[BobW]

Someone way back in the thread posted about the SLB attys having a washer. I just received 10 SLB attys and they don't have washers. But the mesh bridge is much wider then the Joyes I have. Just saying not all SLB attys have washers.