Here she is:
28 gauge a1
7 wraps
2.4 mm ID
1.3 ohms
I'm flavor chasing and using 6mg nic, running 15-17 watts. Loving it so far
I'm thinking that I'm going to go for less wraps and a larger outer diameter with the same overall wire length to maintain my resistance but provide more cross sectional cotton area for the juice to flow through. It seems like at the outer boundaries of the coil the cotton is drained of ejuice, but the juice is still present in the cotton farther from the coils and can't make it to the coil wrap. Also considering maintaining the number of wraps but using a higher gauge wire so I can get a larger inner diameter and maintain my desired resistance in the 1.2-1.5 ohm range
For now this is working really solid and I'm enjoying flavors I didn't know were present in my ejuices.
Let me know what you think of my first build!
Sent from my iPhone using Tapatalk
28 gauge a1
7 wraps
2.4 mm ID
1.3 ohms
I'm flavor chasing and using 6mg nic, running 15-17 watts. Loving it so far
I'm thinking that I'm going to go for less wraps and a larger outer diameter with the same overall wire length to maintain my resistance but provide more cross sectional cotton area for the juice to flow through. It seems like at the outer boundaries of the coil the cotton is drained of ejuice, but the juice is still present in the cotton farther from the coils and can't make it to the coil wrap. Also considering maintaining the number of wraps but using a higher gauge wire so I can get a larger inner diameter and maintain my desired resistance in the 1.2-1.5 ohm range
For now this is working really solid and I'm enjoying flavors I didn't know were present in my ejuices.
Let me know what you think of my first build!
Sent from my iPhone using Tapatalk
Last edited:
