My Magma 510 5v bottom feed juice box

[MahBohMan]

Here's a few pics of a few mods I built, both I can run at 3.7 or 5v. The small box is a "puck" concept NOT thought up by me but by someone on the e-cig forum. The larger 510 bottom feeding juice box was my idea and it works great. It's powered by 4 NiMH 2400 ma AA batteries with a switch that cuts one battery out of the loop if I wish to go for 3.7v. If anyone wants to know how they are built, feel free to ask. I can build one of these in 1 hour. Total cost was about 12 bucks for the bottom feeder without batteries.



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

 

[asdaq]

Looks quite functional and probably lasts a good while too. You could also do multi voltage with a battery blank and save on some wiring work. I gotta ask, but how'd you get the atty to shine brighter than the LED?

 

[MahBohMan]

Thats the vapor being illuminated from below before it billowed out the atty. I built this cus I started dripping, but a 510 atty at 5 volts, your dripping constantly(my 510 was debridged and dewicked). Gets old fast, so I figured why not a bottom feeder. I'll never go back to dripping, this is way too convenient.

 

[WillyB]

The larger 510 bottom feeding juice box was my idea and it works great.

Interesting, I like to know how your idea varies from the numerous bottom feeder designs.

FWIW the almost constant need to replenish liquid once a 510 is debridged and dewicked does get old, real fast.

 

[MahBohMan]

Interesting, I like to know how your idea varies from the numerous bottom feeder designs.

FWIW the almost constant need to replenish liquid once a 510 is debridged and dewicked does get old, real fast.

well im glad i'm not the only one whos got to drip a dewicked 510 constantly lol, I have 2 attys I use with my setup...a magma 510 standard(2.5 or so) and a joye510 standard same ohms. I think the magma gives better flavor. One thing I do, is to immediately block off the air holes at the threaded end of the 510, both of them get plugged with jb weld. I make 2 really small holes in the side of the atomizer above the level of the bridge for vents works good.. This allows the juice..which flows through a 1/16" pipe up through the 510 center hole...to flow up and literally fill the atty to the top of the bridge and soak it completely. Good thing is, with the 2 air holes plugged near the threads, when you release pressure from the bottle, ALL of the excess juice gets pulled right back into the bottle. Basically I can flood the ..... out of the atty..soak everything...back off on bottle squeeze, and in 5 seconds, the excess is back down and I can vape for a LONG time without repumping. Basically, this setup never leaks, and after intentionally flooding the atty and sucking the juice back down, you get a HUGE vapor plume. I like it

 

[WillyB]

Well that certainly is a unique approach.

 

[harley05]

Are you selling that unit by any chance. It's quite intriguing! Please let me know. Thanks. Ed

 

[MahBohMan]

Are you selling that unit by any chance. It's quite intriguing! Please let me know. Thanks. Ed

Not that 1 thats my first gotta keep it but I have a few other things I'm working on. One imparticular is a 5v smoke monster basically a puck design that works with a 510 magma Mega cartomizer and vapes all day long. The megacartomizer I can hold about 1.8ml of juice inand it just works great plain and simple. I'll try to shoot a couple of videos and get em up on youtube.

By the way, I have never used a cartomizer before yesterday. I like em. If you havent tried a cartomizer yet you definetely should if your still using foam mods and straw in regular carts.

I recommend using the magma 510 megacartomizers from volcano for a couple of reasons, the last a loooong time, they don't leak, they hold alot of juice, they smoke nice at 3.7 and 5v....and you dont have to mod them, they are internally ceramic, some new design, zero polyfill. I got 5 for 10 bucks, and so far so good. I have no affiliation with volcano e-cigs whatsoever, I have just tried a bunch of manufacturers and thier stuff works the best in my opinion.

 

[harley05]

Thanks for responding. If you should get or make another similar unit or wish to part with that one. Let me know. Standing open offer. Have fun! Ed

Not that 1 thats my first gotta keep it but I have a few other things I'm working on. One imparticular is a 5v smoke monster basically a puck design that works with a 510 magma Mega cartomizer and vapes all day long. The megacartomizer I can hold about 1.8ml of juice inand it just works great plain and simple. I'll try to shoot a couple of videos and get em up on youtube.

By the way, I have never used a cartomizer before yesterday. I like em. If you havent tried a cartomizer yet you definetely should if your still using foam mods and straw in regular carts.

I recommend using the magma 510 megacartomizers from volcano for a couple of reasons, the last a loooong time, they don't leak, they hold alot of juice, they smoke nice at 3.7 and 5v....and you dont have to mod them, they are internally ceramic, some new design, zero polyfill. I got 5 for 10 bucks, and so far so good. I have no affiliation with volcano e-cigs whatsoever, I have just tried a bunch of manufacturers and thier stuff works the best in my opinion.