My mod is definetly not hitting like it should
- Thread starter roguly
- Start date
- th_trl_thread_readers 0
- Status
Use 100% VG. The big cloud videos are shot using that.
Get a DMM. The guys making big cloud videos are using them, so they know what they have.
Those big cloud videos are generally made with lighting set up to maximize the cloud. Without that lighting, yours will look smaller.
If you want to try smaller air holes, put some tape over them and punch whatever size holes you want to try.
Or buy new gear and then do all this. Up to you
Get a DMM. The guys making big cloud videos are using them, so they know what they have.
Those big cloud videos are generally made with lighting set up to maximize the cloud. Without that lighting, yours will look smaller.
If you want to try smaller air holes, put some tape over them and punch whatever size holes you want to try.
Or buy new gear and then do all this. Up to you
Last edited:
It could be the battery, the mod, the atty, the airhole placement, the juice, the wick, the coil and so on.
You can get a meter and measure drop but you are more likely finding out something about your batteries than your mod.
Is this your first mod/RDA? Have you had other builds that were more successful? Know anyone with another mod to try your IGO on?
Not to sound like a ...., but my guess would be a poorly built RDA... and in this case, too much air. As a Dingo owner, I can tell you that unless you got a lemon (haven't heard of that with Atmizoo stuff before), or your charger isn't working well (fairly unlikely)... you probably just need to learn to build your RDA's better.
Practice practice practice. Then practice some more. Build a coil and vape it for a day. Then re-wick it slightly differently and vape it for a day. Then build a different coil and vape it for a day. Re-wick it and vape it for a day. Do it again. And again... sooner or later you'll get it.
But I must agree with the other posters... you dropped $150 on a mod, spend the $60 to get a good charger and a cheap(ish) multimeter.
Not to sound like a ...., but my guess would be a poorly built RDA... and in this case, too much air. As a Dingo owner, I can tell you that unless you got a lemon (haven't heard of that with Atmizoo stuff before), or your charger isn't working well (fairly unlikely)... you probably just need to learn to build your RDA's better.
Practice practice practice. Then practice some more. Build a coil and vape it for a day. Then re-wick it slightly differently and vape it for a day. Then build a different coil and vape it for a day. Re-wick it and vape it for a day. Do it again. And again... sooner or later you'll get it.
But I must agree with the other posters... you dropped $150 on a mod, spend the $60 to get a good charger and a cheap(ish) multimeter.
Like I stated before, I *wasnt* watching cloud chasing videos. I was watching simple build videos not trying to acheive most clouds. But thanks for your comment that had no purpose and shows you can't read
Last edited:
It seems the only answer people like to give on this forum is "you're a newbbbbbb!" No. I know how to build coils and I don't use them without knowing the resistance. I know there can be a lot of reasons for this problem I just wanted to see if it can be narrowed down but I guess this thread is useless
If you think this thread is useless, you obviously have not bothered actually reading all the post or attempting any VALID suggestions.
If this is the case, I can only speculate you wish someone to come over and fix it for you.
You're being overly aggressive towards those who try to find solutions to your issues. Several potential problem areas have been identified: your air holes might be too large (try covering one of them to see if this helps), you might experience a voltage drop in the mod (which some have pointed out is unlikely, but check to make sure), you might have a problem with your coil build (try building different coils, wicking differently). All good suggestions.
Sent from my GT-I9100 using Tapatalk
Sent from my GT-I9100 using Tapatalk
Are you lung inhale directly and using 100% VG? I did both which are giving me a cloud of vaper on most of devices I have.
wow lots of good suggestions here and you act like no one has offered a fix. maybe its your build maybe equipment but till you get off your high horse and try some of the suggestions IT AINT GOING TO FIX ITSELF
Is this a single, or dual setup?
I agree this thread is useless.
However, it's useless from OUR perspective, because people are trying to help an obvious gentleman scholar who comes to the party without simple numbers, or any rudimentary troubleshooting capability.
A toasted IMR cell coming off the charger at 2.9V, and into what equates to 1/4" airflow isn't gonna atomize anything.
I agree this thread is useless.
However, it's useless from OUR perspective, because people are trying to help an obvious gentleman scholar who comes to the party without simple numbers, or any rudimentary troubleshooting capability.
A toasted IMR cell coming off the charger at 2.9V, and into what equates to 1/4" airflow isn't gonna atomize anything.
- Status
Similar threads
