Want a new Mechanical MOD or new RDA or new DT for larger vapor

[tayone415]

Looking for a new mech mod clone or RDA, I have the hcigar Nemesis is SS, since I couldn't find an RDA or RBA that looked good with the copper, I want to get something that will hit harder and give me more vapor. Right now I'm using a drilled out Nimbus clone and an Igo-w both are drilled bigger than a 1/8th, I have different tips with small, medium and fairly large bores. I tried different builds using 24g, 26g and 28g kanthal with silica wicks, ekowool and cotton, mostly dual coil builds, I tried quads, 4 wraps on ekowool, and tricro coils and ranging between .18 Ohms-.68 Ohms. I'm using ONLY Sony VTC5s and 85-100% VG juices and I tried adjusting the the airflow control on the my Nemesis.

Not sure what I should try, was thinking of getting NO OX ID, and hotwires by Chaddster in beast mode or boom or if I should try a new MOD and or atty and DT.

Prices and options around my area I'm looking in to.

SS Caravela Clone w/gold accents $65
Chi You Four Season SS Clone $40
hcigar Black Copper Stingray clone $65
2 Puffs Flow (Adjustable Airflow) Drip Tip $30
NO OX ID 2oz $10
Hotwires by Chaddster: Beast Mode 26g $15/Boom 24g $20
Imortalizer RDA clone $28
The Explorer RDA $33

 

[MrPlink]

No reason you cant get some monster clouds with the set up you have now.

Are you getting them now and just looking for more?

Because if you arent getting them at all with that rig I would say it is probably your build.

 

[tayone415]

No reason you cant get some monster clouds with the set up you have now.

Are you getting them now and just looking for more?

Because if you arent getting them at all with that rig I would say it is probably your build.

Depending on battery level, which I usually change around 3.9V. In my opinion I get decent clouds to pretty big clouds, just not satisfied anymore.

 

[K_Tech]

Not sure what I should try, was thinking of getting NO OX ID, and hotwires by Chaddster in beast mode or boom or if I should try a new MOD and or atty and DT.

I hope this doesn't sound too harsh, but unless Chadster soaks his wires in unicorn tears, they won't get you anything except an extra plastic bag and a card with pretty graphics on it. Hotwires are just A1 Kanthal - less than $10 for 100 feet from Temco or Lightning Vapes.

I don't know about the Nimbus, but I can tell you that a Trident V2 (clone) with dual 6-wrap 27 gauge microcoils at 0.4 ohms blows monster clouds.

 

[tayone415]

I hope this doesn't sound too harsh, but unless Chadster soaks his wires in unicorn tears, they won't get you anything except an extra plastic bag and a card with pretty graphics on it. Hotwires are just A1 Kanthal - less than $10 for 100 feet from Temco or Lightning Vapes.

I don't know about the Nimbus, but I can tell you that a Trident V2 (clone) with dual 6-wrap 27 gauge microcoils at 0.4 ohms blows monster clouds.

My Nimbus clone is hard to work with even with 28 g kanthal since the port holes are so small, I just use the cap on my igo-w, I looked into the trident but the adjustable airflow doesn't work for me, the biggest I think was 2 mm and my holes are drilled out to I think 9/64. I'm a cloud junky and feel like my clouds are getting smaller everyday and I still have about 90 feet of both 26g and 28g and only about 4 inches of 24 g lol.

 

[VapingTurtle]

Try increasing the VG content of your juice.

 

[tayone415]

Try increasing the VG content of your juice.

I only use 80%+ VG

 

[VapingTurtle]

Try the advice at ED Treatment | ......® (sildenafil citrate) Safety Info