My new GGTS w/AVS

[icemangrafx]

Thanks for the photos , specially the comparison with the mako mino

Joel

Hi Joel,

Glad u like it & thanks. Just to show the comparison of using a mako minno and the GGTS.
For those who wants a small mod. To me, minno is one of the smallest mod. But GGTS has the versatality of the telescope which can take most battry size and type.

Regards, Jay

 

[Wylie]

I have noticed a minor problem, Looking for some feedback...

I am noticing my bottom tank, or overflow tank, is getting a lot of liquid....
-Tim

What type of atty are you using? I'm using 808 cartos from V9 and have had a total of about 3 drops in the collection tanks over the last two weeks. I vary between the CR being open or closed (more closed if I need to draw juice into the carto) and anywhere in between but haven't noticed any difference.

A few guesses: 1) you're tightening the top cap of the AVS or mouthpiece with the CR closed. That could create pressure to force liquid downward. 2) I put the O-Ring on the atty before inserting into the AVS tank so it's below the tank. When I put the atty into the tank and then add the O-Ring, I got a drop. 3) PG vs. VG. I've had no drops when using VG, perhaps because it's thicker?

Just guessing.

 

[T-Hefner]

Wylie,
Yeah, I put the oring around atty then insert atty from bottom of tank...Like you. But, I do leave CR closed when tightening top, maybe it is creating to much pressure and making liquid go downward. I'll have to try that. I have been using a standard SLB 901 atty...with PG liquid... I'll have to try leaving CR open a lil when I put top cap on AVS....

Thanks for the feedback...

-Tim

 

[imeothanasis]

Hi Joel,

Glad u like it & thanks. Just to show the comparison of using a mako minno and the GGTS.
For those who wants a small mod. To me, minno is one of the smallest mod. But GGTS has the versatality of the telescope which can take most battry size and type.

Regards, Jay

super nano was and it still is the smallest mod in market ice my friend but I stopped its production because it had no versatility at all. It was a simple mod but of course it was the best when it was made. After this many things changed on GG by adding more features on it but with a cr123 its still very small.

It can be big too as you already know. It can be anyting maybe

 

[imeothanasis]

Wylie,
Yeah, I put the oring around atty then insert atty from bottom of tank...Like you. But, I do leave CR closed when tightening top, maybe it is creating to much pressure and making liquid go downward. I'll have to try that. I have been using a standard SLB 901 atty...with PG liquid... I'll have to try leaving CR open a lil when I put top cap on AVS....

Thanks for the feedback...

-Tim

Tim, if you leave CR open then your collector tank will flood. So keep CR closed as you do now. I think the problem is on your atomizer. Please change it and tell me the results

 

[HoPeFuLLL]

Atomiser or the Vaseline on top o-ring is my guess, makes a huge difference.

 

[icemangrafx]

I have been using the GG a week now with a lr 510 atty & mocha mint coffee all vg. The first 4days been dripping and no leak or flood in CT. Coming to weekend, performance started to drop. I started to drip quite often after 4drops, which normally will take sometime before I needed to drip again. When inspected, my CT started to collect juice. Remove atty and it was clogged. Clean the atty and CT. Now, works as good as before. Not using AVS yet.

It could have been due to type of juice used. As it is all vg, it could have clogged the atty which will reduce vapor production and leak. The atty had residue from the juice, since it was mocha & coffee. Will try with other juice type & give feedback. Like Imeo mentioned, once performance drop, it's time to clean the GG

Regards,
Jay

 

[VPDownunder]

Yeah the GGTS and AVS require regular cleaning to avoid problems, noalox on the GGTS threads and Vaseline on the AVS threads and o-rings after cleaning.

 

[twilab]

I've changed a way to fill liquid a bit to avoid leackage into collector tank when close top cap (thats happened sometime even with fully closed CR, and it is crucial for my setup with LR atty). What I do now, I just take liquid tank separetly from the rest parts, close bottom hole with finger, fill liquid, close top cap, and then screw liquid tank to the GGTS. That way I can keep collector tank fully dry.

 

[imeothanasis]

I've changed a way to fill liquid a bit to avoid leackage into collector tank when close top cap (thats happened sometime even with fully closed CR, and it is crucial for my setup with LR atty). What I do now, I just take liquid tank separetly from the rest parts, close bottom hole with finger, fill liquid, close top cap, and then screw liquid tank to the GGTS. That way I can keep collector tank fully dry.

Nice trick twi my friend. I do sometimes the same but I didnt recomend it because some people will find it a little more dificult to do it that way. But yes its a nice trick. But I think that a small amount of liquid inside collector tank helps AVS works better because you need less primary inhales to refill the atty when it goes dry.

 

[twilab]

But I think that a small amount of liquid inside collector tank helps AVS works better

Yes Imeo, it is good with HV config (7.4) then atty can vaporize all excees liquid easely. For LR it doesn't work good for me. Atty get flooded and doesn't perform well. So I had to fill it, then unscrew and empty collector then screw again.

This can be just my particular case, as attys has a bit different hole size

Normaly one quick powerfull inhale enough to make it all wet to vape. And also, I start using this approach when fill not enough liquid (instead of close CR inhale open again)

 

[imeothanasis]

Yes Imeo, it is good with HV config (7.4) then atty can vaporize all excees liquid easely. For LR it doesn't work good for me. Atty get flooded and doesn't perform well. So I had to fill it, then unscrew and empty collector then screw again.

This can be just my particular case, as attys has a bit different hole size

Normaly one quick powerfull inhale enough to make it all wet to vape. And also, I start using this approach when fill not enough liquid (instead of close CR inhale open again)

everyone has its own trick that works better for him so I dont really have any objections. I just try to give to all people a general guide for best results on most of cases

 

[icemangrafx]

Hi Imeo,

Will there be a stainless steel version of GGTS? Would love to have a piece is stainless steel...

 

[imeothanasis]

Hi Imeo,

Will there be a stainless steel version of GGTS? Would love to have a piece is stainless steel...

Aas I wrote in another thread, steel is redicous heavy ice my friend. Imagine the GGTS-AVS combo in steel. You cant smoke it buddy, I ensure you about that. Imagine 3 GGs together and a little more, thats the analogy.

 

[icemangrafx]

Aas I wrote in another thread, steel is redicous heavy ice my friend. Imagine the GGTS-AVS combo in steel. You cant smoke it buddy, I ensure you about that. Imagine 3 GGs together and a little more, thats the analogy.

OK Imeo,

Thank you for reassuring me on the weight.. Any new ideas/invention coming end of the year? My GG is going strong...Not tried AVS coz no Imeo atty purchased yet. Now vaping like a king...

Regards,
Jay

 

[VPDownunder]

LR, reg and HR/VHR 901's work fine with the AVS, Turbo cartos also work extremely well with it

 

[mwa102464]

Imeo,

Where is my darn 24kGold GGTS/AVS I've been waiting for weeks now and I'm starting to get a little upset it's not completed and in my hands yet.!!!

 

[VPDownunder]

I love my GGTS + AVS so much I just bought a second one

 

[HoPeFuLLL]

On it's way.... frantic arvo...

 

[VPDownunder]

Thanks mate, A grade service yet again