Nebraska Vaping, Part 2

[Jakersvape]

That's odd.. Wonder what the problem is? Is the mesh propped up against the sides? I wonder if the coil is cutting into the wick after you get it attached to the leads..

That's my guess.....the coil cutting into the wick....I need to get a tiny drill bit or something so I can wrap my coil peter k style.....I have a hard time getting a good coil wrapped when I wrap it directly on the wick....either too tight or too loose.....I did 6/7 wrap coil and got 1.5ohms...

 

[Jakersvape]

You will have to let me know how that goes.. Maybe some pic updates!

Darn....broke my camera last night...sorry bud!

 

[Jakersvape]

Morning everybody. Who's ready for Tuesday?

Not this guy.....I'm ready for a nap already!

Gut another busy day?

 

[PittBoss]

That's my guess.....the coil cutting into the wick....I need to get a tiny drill bit or something so I can wrap my coil peter k style.....I have a hard time getting a good coil wrapped when I wrap it directly on the wick....either too tight or too loose.....I did 6/7 wrap coil and got 1.5ohms...

What gauge are you using? How thick is your wick?

 

[PittBoss]

Darn....broke my camera last night...sorry bud!

C'mon man!

 

[PittBoss]

Not this guy.....I'm ready for a nap already!

Gut another busy day?

Sure do! It's Tuesday though.. Gotta go at it head on!

 

[Jakersvape]

What gauge are you using? How thick is your wick?

30ga, not sure how thick the wick is......I think the mesh was just over 2 inches...

 

[Jakersvape]

C'mon man!

Oh FFS......

 

[PittBoss]

30ga, not sure how thick the wick is......I think the mesh was just over 2 inches...

That sounds like a lot crammed into that little space.. I would guess that when it gets bunched up in there, it is causing shifting of the coils. What if you wrap a little silica in a piece of mesh that fits in there horizontally.. That way the silica comes out of both ends and wraps around in the cup. You will still get the mesh taste without all of the hassel

 

[PittBoss]

Oh FFS......

I can't like this enough! Lol

 

[Jakersvape]

That sounds like a lot crammed into that little space.. I would guess that when it gets bunched up in there, it is causing shifting of the coils. What if you wrap a little silica in a piece of mesh that fits in there horizontally.. That way the silica comes out of both ends and wraps around in the cup. You will still get the mesh taste without all of the hassel

I might end up doing that next time.....I've got it working right now, we'll see how long it lasts...

 

[PittBoss]

I might end up doing that next time.....I've got it working right now, we'll see how long it lasts...

I like what I'm hearing!

 

[Jakersvape]

I like what I'm hearing!

By the time I got the hot spots worked out it was time for bed! I used it for a few minutes though, and it was rockin!

 

[seraphicdragon]

MORNIN ALL!!! I got nothing this mornin just need coffee,

 

[Jakersvape]

MORNIN ALL!!! I got nothing this mornin just need coffee,

Mornin.....if you didn't drink coffee you would be able to come up with something to say......

 

[seraphicdragon]

Mornin.....if you didn't drink coffee you would be able to come up with something to say......

hush you.. like you dont grab a bottle of water or soda first thing when you wake up lol..

 

[PittBoss]

MORNIN ALL!!! I got nothing this mornin just need coffee,

Nothing?! C'mon woman! I have gone through 2 pots since 6..I'm revved up already!

 

[PittBoss]

Mornin.....if you didn't drink coffee you would be able to come up with something to say......

You already busted out a FFS, you dont get to start the coffee blasphemy as well!

 

[PittBoss]

hush you.. like you dont grab a bottle of water or soda first thing when you wake up lol..

Thats usually the second thing he grabs in the morning!

 

[seraphicdragon]

Nothing?! C'mon woman! I have gone through 2 pots since 6..I'm revved up already!

Hey i am on spring break i dont have to be up until i wanna be up