• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Nebraska Vaping, Part 2

Status
Not open for further replies.

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
i normally dont have any noticable allergies cant say i dont have some... what do you mean by drinking lots of water does that aid in it cause the last few days i got a new brita water bottle and its constantly full by myside so i have been drinking more plain water then i use to lately. The only main difference other then the water i can think of is the juice i am using but i am keeping it relatively 50/50 mix to 60/40 mix. So i dont see how it could be that, wizard labs is the prim nic for most companies so at some point i probbly have vaped it before, so i believed it was the flavoring, but it could be the weather its been mostl noticable the last week or so.

EDIT: wonder if there is a corrolation to this also being my first spring that i havent smoked analogs also.. the fibers in my lung are regenerating and not coated in tar... hmmm.

I'm guessing after the sillia (maybe that's what it's called) in the lungs clean and repair themselves, they are more prone to water absorption. I tend to drink 3 liters to a gallon of water a day and tend to notice more when I'm on the higher end of that spectrum and even when I am dehydrated. I'm pretty sure that on either end of the spectrum, is a different kind of lung "ache".. Mind you, this doesn't happen with me enough to be of a concern. I do have a sensitivity to PG, but I tend to vape around the 50/50 mark and only notice it if I start to get towards the 70/30 mark.
 

Jakersvape

Vaping Master
ECF Veteran
Verified Member
Oct 27, 2012
6,795
1,124
43
Lincoln, NE
err i believe its a sealed connector, there are no obvious air holes on the connector. This last time i transfered it to the vamo to figure this out i didnt even remove the drip sheild i just unscrewed it all in one peice from the lrider that it works on to the vamo and no airflow, and yes i am sucking.

Pitt, I'm dissapointed you let this one go.....

Did you ask your bf if you were sucking the right way......
 

seraphicdragon

Ultra Member
ECF Veteran
Verified Member
Feb 16, 2013
1,376
131
42
nebraska
I'm guessing after the sillia (maybe that's what it's called) in the lungs clean and repair themselves, they are more prone to water absorption. I tend to drink 3 liters to a gallon of water a day and tend to notice more when I'm on the higher end of that spectrum and even when I am dehydrated. I'm pretty sure that on either end of the spectrum, is a different kind of lung "ache".. Mind you, this doesn't happen with me enough to be of a concern. I do have a sensitivity to PG, but I tend to vape around the 50/50 mark and only notice it if I start to get towards the 70/30 mark.

See never noticed anythign until recently and i am wondering if maybe i am mixing in to much pg... not really measuring measuring eyball measuring and when i have ordered its always 50/50 and i am betting i am mixing more a 60-70 pg to vg ratio... hmm cause ya now i feel fine and its mostly a 50 50 mix i am vaping on thick enough to be higher vg for sure

edit: also have noticed being slightly congestied and getting slightly flemmy also which i never get unless i am sick and i dont feel sick
 
Last edited:

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
err i believe its a sealed connector, there are no obvious air holes on the connector. This last time i transfered it to the vamo to figure this out i didnt even remove the drip sheild i just unscrewed it all in one peice from the lrider that it works on to the vamo and no airflow, and yes i am sucking.

Would you mind posting a link to the atty in question?
 

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
Pitt, I'm dissapointed you let this one go.....

Did you ask your bf if you were sucking the right way......

I did.. I was going to make some snide comment, but it would come off as crass and highly inappropriate.. Oh, who am I kidding? I plum let that slip right between my legs, er, fingers!
 

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
Has anyone ordered from Exhalevapers before? I was really hoping my order would have been shipped by now.....I like when I place an order and the company ships it within a day....their website says 1-2 business days to ship....was just hoping it would have been sooner

I haven't.. You ordered Monday or yesterday? Depends on how backed up they are and if it's a mom and pop shop, they could be occupied.
 

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
See never noticed anythign until recently and i am wondering if maybe i am mixing in to much pg... not really measuring measuring eyball measuring and when i have ordered its always 50/50 and i am betting i am mixing more a 60-70 pg to vg ratio... hmm cause ya now i feel fine and its mostly a 50 50 mix i am vaping on thick enough to be higher vg for sure

edit: also have noticed being slightly congestied and getting slightly flemmy also which i never get unless i am sick and i dont feel sick

You very well could just be going through the cleaning and repairing stages.. I would always just keep an eye on things and if it didn't improve within a couple of weeks, I would change up my ratios and/or liquid. I would also take mucinex to help get rid of a lot of that crap. You could have a PG sensitivity as well. Might have to do some testing and documentation
 

seraphicdragon

Ultra Member
ECF Veteran
Verified Member
Feb 16, 2013
1,376
131
42
nebraska
Would you mind posting a link to the atty in question?

Thats the link and i think its the the adapters acutally... on my l-rider i have split floating pin and the connector must not be completley sealed, cause i am getting airflow then trough the base... on my vamo its a solid pin and the conector is being completely sealed by it so the side air flow is not enough and the draw is way to stiff... with another 510 to 510 connector it works just fine even if it looks silly lol.
 

seraphicdragon

Ultra Member
ECF Veteran
Verified Member
Feb 16, 2013
1,376
131
42
nebraska
You very well could just be going through the cleaning and repairing stages.. I would always just keep an eye on things and if it didn't improve within a couple of weeks, I would change up my ratios and/or liquid. I would also take mucinex to help get rid of a lot of that crap. You could have a PG sensitivity as well. Might have to do some testing and documentation

ya, its so hard to tell as so many different things are going on now... the weather is getting nicer so it could be allergies, i am drinking more water, mixing my own juice and i dunno many companies who use flavorwest... i think most use flavorart or tfa if they are not extracting there own flavors... i am more then likely using a higher pg mix as i my nic is mixed with pg so its at least 70/30 now that i do the calcualtions in my head... which is the highest pg i have ever used. HMMMMM if i were a betting person i think that might be it. Its either that or i cant use FW flavors which would suck as i have a crap ton of them sigh.


Edit: so i am either catching a cold or i do have allergies i stepped outside to check the mail and now i am freakin congested and sneezing...
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread