• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Nebraska Vaping, Part 2

Status
Not open for further replies.

Jakersvape

Vaping Master
ECF Veteran
Verified Member
Oct 27, 2012
6,795
1,124
43
Lincoln, NE
Ok...it did. I'm nearly a geek....I can post a pic...lol....
Igo on the natural.
Read lots of post that it is super easy to set up. I found it to be more cumbersome than the aga.
Like the octopus, it's not really set up to pull the cover off and eyeball what's going on....peeking at it through the drip tip hole.
O-rings are real sloppy....not tight at all....that's it for the negatives so far.

On the plus side...hitting very well...lots of vapor and a real nice TH....the flavor is way better than my aga and I'm already getting a nic buzz:toast:....woohoo....

For what I paid and for what it is....two big thumbs up.....
I'm going to use this soon to try to pinpoint my affliction......wish me luck....lol....

The hardest part for me to set up the igo was wrapping the coil wires around the posts.....my big fat fingers kept getting in the way!! I read a lot of people having problems with the O rings.....mine are great.....i actually kind of have a hard time taking the cap off....
 

Jakersvape

Vaping Master
ECF Veteran
Verified Member
Oct 27, 2012
6,795
1,124
43
Lincoln, NE
Again...the hardware or the tall Busch????
You lookin good ham chop.....how youdoin?????????

Both! I'm doing alright.....got Joe over here fixing a hole that Becky put in the drywall......getting ready to eat dinner and quaff a few with Joe......it's a shame you live so far away.....would love to quaff a few with you more often than we do!
 

hawkizefan

ECF Guru
ECF Veteran
Dec 10, 2010
10,741
24,580
65
omaha
I'm cleaning blinds....not blind girls....dammit. I could get into scrubbing a blind girl or 2....but alas...I'm talking window blinds.
It's irritating and mind numbing....I may need more beer.
I can't clean the slats hanging without a lot of to-do's....and I'm not into to-do's today.
Slipping each one out is tedious and frustrating.....

What you all doing tonight? Wanna come clean a blind????
 

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
Nope....just cough my .... off if I've taken a vape break.
Once I get over it and vape like a nic addicted chimp....it's cool. But if I take a 30 minute break I have to work through it again.

Just dripped straight pg and vg.....nothing. But I was vaping prior to that....but would assume if it was an aversion to one or the other it would have red flagged....

Been thinking about the variables and what I have come up with is this...
No change on nic, vg or pg.
Flavors are stock...not new so don't think that's it.

The only variable I can come up with is SS mesh......
I've had SS mesh for 6 months or more and have wicked with it, but in the last month I've really stepped it up with the mesh.....
That's the only thing I can come up with.....and that could be bogus....who knows....

It's short term and I'm such a stud that it doesn't matter:p...but still it's a bit worrisome.....


Did I mention HELL YEAHS BRAVES.......don't want to be remiss in that.....

I would be willing to bet its not the mesh and probably the VG, just because that's been increased recently.. I could also see it just being a coincedence
 

hawkizefan

ECF Guru
ECF Veteran
Dec 10, 2010
10,741
24,580
65
omaha
The hardest part for me to set up the igo was wrapping the coil wires around the posts.....my big fat fingers kept getting in the way!! I read a lot of people having problems with the O rings.....mine are great.....i actually kind of have a hard time taking the cap off....

I did a drill bit coil and took some stock wick(3 strands) that I got somewhere...had a hard time getting the coil set....well..until I put the bit back in the coil to seat it. That worked way better, but just the coil and trying to attach it...forgetaboutit....

The stock wick with the crappy wire....????
I slid the wire to one end, straightened it out and used the crap wire to thread and pull the 3 crappy wicks through my drill bit wick. Worked slick. I would like to take credit for that, but read it somewhere.

Whatcha wearing right now pookie.....????????
 

hawkizefan

ECF Guru
ECF Veteran
Dec 10, 2010
10,741
24,580
65
omaha
Both! I'm doing alright.....got Joe over here fixing a hole that Becky put in the drywall......getting ready to eat dinner and quaff a few with Joe......it's a shame you live so far away.....would love to quaff a few with you more often than we do!

+1 on that. Wish you lived next door in the world of good tricity......
 

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
The hardest part for me to set up the igo was wrapping the coil wires around the posts.....my big fat fingers kept getting in the way!! I read a lot of people having problems with the O rings.....mine are great.....i actually kind of have a hard time taking the cap off....

Pretty sure I blew my o-ring the other day..
 

seraphicdragon

Ultra Member
ECF Veteran
Verified Member
Feb 16, 2013
1,376
131
42
nebraska
Well, Leia, suga.. looks lik you are having a blast! Thanks for finally putting up some pics and keep rocking! Enjoy yourselves and keep it real! Make sure to bring us all back some goodies..

Haha, it was fun honet getting bored so heading to seafood place for dinner then not sure what we r doing after... blew all my money for a year on that purple wood box mod 200 bucks but so pretty

Sent from my SCH-R950 using Tapatalk 2
 

Jakersvape

Vaping Master
ECF Veteran
Verified Member
Oct 27, 2012
6,795
1,124
43
Lincoln, NE
I did a drill bit coil and took some stock wick(3 strands) that I got somewhere...had a hard time getting the coil set....well..until I put the bit back in the coil to seat it. That worked way better, but just the coil and trying to attach it...forgetaboutit....

The stock wick with the crappy wire....????
I slid the wire to one end, straightened it out and used the crap wire to thread and pull the 3 crappy wicks through my drill bit wick. Worked slick. I would like to take credit for that, but read it somewhere.

Whatcha wearing right now pookie.....????????

Glad to hear you got it working....i just took 2 strands of 2mm silica and doubled it over, then wrapped my coil directly on it... Then it was a biatch wrapping the ends of the coil around the posts, but it's been working great....
I'm wearing nothing......hoping it will entice you to come over... ...:eek:
 

hawkizefan

ECF Guru
ECF Veteran
Dec 10, 2010
10,741
24,580
65
omaha
Glad to hear you got it working....i just took 2 strands of 2mm silica and doubled it over, then wrapped my coil directly on it... Then it was a biatch wrapping the ends of the coil around the posts, but it's been working great....
I'm wearing nothing......hoping it will entice you to come over... ...:eek:

Cool....but whatcha wearing?????
 

hawkizefan

ECF Guru
ECF Veteran
Dec 10, 2010
10,741
24,580
65
omaha
What I wouldn't do for some good ol' finger wigglin tricity.. ..

I know....right.
Becky could have a proper nite lite....

Damn....I'm usually not vindictive...ok...he'll yeahs I am.
Becky cut me to the core and I can't let it go. I know....when she grows up she won't do that but....damn....

Do you think this might be a HAWK problem and not a Becky problem?????

Lol....Becky is the fagizzle....I'm just goofin...sorry...
 
Status
Not open for further replies.

Users who are viewing this thread