Need a starter kit.
- Thread starter ElPasa
- Start date
- th_trl_thread_readers 0
- Status
Hello Elpasa I would definitely recommend the MVP 2.
http://101vape.com/vvvw/148-innokin-itaste-mvp-v20.html
I bought it an it was the second mod I ever owned and it's a staple in any vapors arsenal. 2600 mah battery, vv up to 5 vw up to 11. An it acts as a pass through and can charge anything that hooks up to a USB. The clearomizer it comes with is the iClear 30s and I personally love it. It's a dual coil top fed tank system and the heads last a while.
Sent from my iPhone using Tapatalk
http://101vape.com/vvvw/148-innokin-itaste-mvp-v20.html
I bought it an it was the second mod I ever owned and it's a staple in any vapors arsenal. 2600 mah battery, vv up to 5 vw up to 11. An it acts as a pass through and can charge anything that hooks up to a USB. The clearomizer it comes with is the iClear 30s and I personally love it. It's a dual coil top fed tank system and the heads last a while.
Sent from my iPhone using Tapatalk
I've gotten to the point where I give 3 possibles.
Dirt cheap, blister pack eGo clone with CE4. Actually this has two, eGo 650mAh w/ CE4 Clearomizer Blister Pack Starter Kit - MyFreedomSmokes.com is really cheap (they also have a VV, but are out now) or if you are a bit more adventurous, Easy Electronic Cigarette Starter Kit | Virgin Vapor | Electronic Cigarette Organic e-Liquid | Electronic Cigarettes because you get a sample of one of their flavors. This is actually a little bit better deal, because of the juice, which I think is amazing. I actually have two of these (don't ask) and use it. Will probably keep it around too as my "Going out to the bar." vape because I could care less if something happens to it.
In the middle I'd recommend Innokin iTaste VV (V3) Express kit - 101 Vape with a Kanger Protank II - 101 Vape on top.
For the top range, just starting, I'd recommend a Innokin iTaste MVP V2.0 - 101 Vape with the same Protank II as above.
If you get the Protank, I'd recommend picking up http://101vape.com/clearomizers-glassomizers/40-kanger-protank-replacement-coils.html. That way you have heads for a good long time before having to possibly worry about messing with coils and stuff.
Personally, I wish I'd started with the MVP2, but that's just because I love my VV3 and would have rather had the larger battery if I'd known what I was doing. Glass tanks, too, are something I recommend. Then you don't have to worry about what you put into them.
Dirt cheap, blister pack eGo clone with CE4. Actually this has two, eGo 650mAh w/ CE4 Clearomizer Blister Pack Starter Kit - MyFreedomSmokes.com is really cheap (they also have a VV, but are out now) or if you are a bit more adventurous, Easy Electronic Cigarette Starter Kit | Virgin Vapor | Electronic Cigarette Organic e-Liquid | Electronic Cigarettes because you get a sample of one of their flavors. This is actually a little bit better deal, because of the juice, which I think is amazing. I actually have two of these (don't ask) and use it. Will probably keep it around too as my "Going out to the bar." vape because I could care less if something happens to it.
In the middle I'd recommend Innokin iTaste VV (V3) Express kit - 101 Vape with a Kanger Protank II - 101 Vape on top.
For the top range, just starting, I'd recommend a Innokin iTaste MVP V2.0 - 101 Vape with the same Protank II as above.
If you get the Protank, I'd recommend picking up http://101vape.com/clearomizers-glassomizers/40-kanger-protank-replacement-coils.html. That way you have heads for a good long time before having to possibly worry about messing with coils and stuff.
Personally, I wish I'd started with the MVP2, but that's just because I love my VV3 and would have rather had the larger battery if I'd known what I was doing. Glass tanks, too, are something I recommend. Then you don't have to worry about what you put into them.
Thanks for your recommendation it looks great. But unfortunately I was hoping to spend fewer money also seems a bit too professional/heavy duty I might be wrong but it looks complicated.
If that's the case then that's just fine. I would then suggest the innokin VV like stated above. It's small and sleek like a pen (I have never owned one as I was always attracted to box mods from the beginning but I would recommend it anyway from the hype) whatever works for you works for you
Sent from my iPhone using Tapatalk
v-ecigs . com has the blister kits for $7.55 I believe if that's the route you choose. If the budget allows it I'd go MVP2 or VV though... IMO
I started off using the eGo customisable kit from HappyVaper.
So far so good, have not had any problems at all. I was new to all this also, and it was a bit overwhelming at first. I got some good advice from the forums and the live chat over at HV. Ended up getting 4 eGo-t upgrade batteries and 2 Aspire BDC ET-S tanks (clearomizers). Tanks are easy to use, not too hard to fill and the coils can be replaced easily and are cheap to buy. Great vapor, can't really comment on the taste, I've only tried 2 flavors so far. Since it is customisable, you choose how much you want to spend depending on your needs.
Have to say though, not that I am understanding a bit more, I am already looking at new toys! ;-)
So far so good, have not had any problems at all. I was new to all this also, and it was a bit overwhelming at first. I got some good advice from the forums and the live chat over at HV. Ended up getting 4 eGo-t upgrade batteries and 2 Aspire BDC ET-S tanks (clearomizers). Tanks are easy to use, not too hard to fill and the coils can be replaced easily and are cheap to buy. Great vapor, can't really comment on the taste, I've only tried 2 flavors so far. Since it is customisable, you choose how much you want to spend depending on your needs.
Have to say though, not that I am understanding a bit more, I am already looking at new toys! ;-)
I'm currently looking at the Innokin iTaste 134 and VTR..decisions decisions, what do you guys recommend?
In short... Neither. VTR's button as a tendency to start misfiring after awhile and never been a fan of the 134's features. But if you needed a PV that can double as a self defense weapon... Either will work great for that! (They both are HEAVY)
MVP2 is Innokins most solid piece... I've had mine going on a year with daily abuse and it still works fine. I'll be the first to admit it doesn't hit as hard as some other mods and the floating pin can be a pain in the rear.... but overall it's solid and I've had no issues.
I was looking at those too, thanks a lot for the feedback. Do you have the iclear 30? I was looking at the iclear 30 kit, a lot cheaper than the vtr also which is always good
I love my VV3 and my next mod will be an MVP2. (Unless ProVape releases the Provari 3 before I'm ready to pull the trigger on the MVP2.) And that's because the VV3 does exactly what I want it to the way I want it to. I want another one, except bigger.
Looked at the rest of their lineup, but the price for performance wasn't there. I want variable wattage, passthrough and an ohmmeter. Therefore ...
That and $40 for a 2600 mAh battery you can charge other devices off of is actually not too awful even if it weren't a mod.
Not a fan of top coils (though many people are)... So can't help you much there... Sorry...
EBay has ego starters for 11 dollars free shipping doesn't come with juice but it's a great intro starter for very cheap. There are also some vv ego twist for around twenty another good starter
Cheaper but elegant - Evod starter kit, comes with all you need except the juice.
Alittle more expensive - Vision spinner battery + mini protank 2 or 3 (single coil vs dual coil)
If you want something bigger go with MVP2 kit.
Alittle more expensive - Vision spinner battery + mini protank 2 or 3 (single coil vs dual coil)
If you want something bigger go with MVP2 kit.
- Status
Similar threads
- Locked
- Locked
