need advice on igo w rda battery question!

[jacob vining]

hey i have a dilemma i have a xgun vv and am wanting to start with rebuldibles well my problem is. battery issues i have a sigelei 18650 22000 mAh battery now i know thats not the best for a rda because its an icr but i figure because my mod is regulated it might be okay?? whats youre thoughts on this i will be getting a panasonic battery within the next couple of weeks but i want to know if for the time being i can slide with that battery in mod with the igo w attached i cant wait to start building! and money is tight thanks in advance!

 

[HecticEnergy]

Don't know about the xgun, all apvs have their limits though. Check the max amp rating of the mod.

 

[Tinkiegrrl]

Hmm... I just did a quick google search on the mod in question, and it has a 12 watt limit. I doubt the mod will be able to fire anything 1 ohm, no matter what battery you have in it. Make sure you test your coils before firing, and I'd build them at 1.3 ohms or higher.

 

[jacob vining]

so would it be safe for the time being??

 

[jacob vining]

so would it be safe for the time being??

Hmm... I just did a quick google search on the mod in question, and it has a 12 watt limit. I doubt the mod will be able to fire anything 1 ohm, no matter what battery you have in it. Make sure you test your coils before firing, and I'd build them at 1.3 ohms or higher.

 

[bluecat]

It really depends on the amp limit of that battery. As long as you are within the limits, you would be fine. I couldn't find anything other than some piece that states "not for sub ohming".

You should be fine on a normal regulated device with a standard ohms build.

I use a 1.8 ohm single coil Igo W on a MVP2.