Need advice on Spinner Kit purchase from myvaporstore

[rvmeush]

After a fair bit of online investigation I finally decided to get a Spinner starter kit from myvaporstore. I was planning on getting two 1300 mah batteries and two Kanger EVOD eGo clearomizers. I thought it would be prudent to get some extra atomizer heads for the EVODs but there are two resistance versions offered (1.8 and 2.4 ohms) and I'm not sure how many atomizers to get and what resistances to pick. I was also considering an eGo case as well, but there is no size information on the website and I'm not sure if it would fit.

I didn't see any phone numbers for actual people at myvaporstore to speak with. So, I'd appreciate suggestions on how many and which atomizer heads to get, whether the eGo case is worthwhile and if it will fit, and other items beside eliquid that I should consider getting.

I've seen pretty good recommendations for myvaporstore, but if there are other stores I should consider for this purchase I'd like to know that as well. Thanks.

 

[Timbuck55]

I like the Vision spinners with Vision BDC xjet tanks. But if I was you, I'd just get a MVP2 if you have the money to spare.. Battery life is insane. I've not charged mine for 4 days now and I vape constantly.

 

[Burn_notice_fan_NY]

I have the same kit and absolutely love it but prefer top coil in lieu of bottom. From my understanding it does not matter the ohms you get from that site with the spinner as it is vv(asked this question when I was contemplating the purchase). The lower you go the more vapor, the higher you go, the more flavor and cooler throat hit (I believe).

 

[Burn_notice_fan_NY]

MVP 2 is next on my list though.

 

[klynnn]

I usually recommend people try a top and bottom coil type topper just because everyone is so different in their preferences. Once you know what you like best then you can eliminate some things. I tend to prefer top coils also because of the warmer vape. The MVS kit is excellent. I have ordered from them many times. With the variable voltage you have leeway to lower or raise the voltage by turning the dial at the base, so either of those atomizers would work. Always get extra heads to start with maybe 5 or so.

 

[ccubed]

Hi and welcome to ECF. I use Vision Spinner batteries they work fine for me. I have not used the EVOD clearos, but use Kanger MT3S clearos (which I think are kind of like the big brother to the EVOD) and the coils I get are 1.8ohm resistance.

Everyone's path is going to be different, but I have 2 friends who use the EVODs and they seem to like them.

When I joined ECF, the folks here suggested getting backups for all of my gear and backups for my backups. Don't ever want a dead battery or other equipment failure to give me an excuse to go back to analogs.

Though there are many options for gear, what you ordered is a fine starter kit. There is always time for more advanced gear in your vaping future, should you choose to go that route. What you are ordering will be fine backup gear if you do decide to upgrade your gear in the future.

Keep the vape and namaste.

 

[rvmeush]

I usually recommend people try a top and bottom coil type topper just because everyone is so different in their preferences. Once you know what you like best then you can eliminate some things. I tend to prefer top coils also because of the warmer vape. The MVS kit is excellent. I have ordered from them many times. With the variable voltage you have leeway to lower or raise the voltage by turning the dial at the base, so either of those atomizers would work. Always get extra heads to start with maybe 5 or so.

Thanks for the suggestions. The EVOD seemed like a simple starter clearomizer that was fairly easy to replace the atomizer. Do you have a top coil clearomizer that you would recommend? The Innokin iClear 16 is the only one I see offered that I believe is a top coil unit.

 

[klynnn]

I have several of the iclear 16 type and like them. I mainly use the vivi nova 3.5ml, but that isn't in the kit. Each of those has different type heads so when you find the one you like best you can save from that point on. If unsure I would get 2 heads of each to try and plan on a future order. I also have protanks but they have a much cooler vape.

 

[spaceballsrules]

Since you are using VV batteries, get the 2.4 ohm coils, as that will give you more leeway in voltage adjustment. 5 extra coils should be plenty.

The eGo case is large and should accommodate the 1300mah batteries without any issue. The Spinner 1300 is 4.4 inches, and the case is 6.5 in. long. You might be able to fit a fully assembled battery with an EVOD attached but it will be tight.

MyVaporStore is a great vendor. I have shopped with them many times, and I have never an issue with any of the products or their service. Use the code "5ECF" to get 5% off certain items. Free shipping on orders $75 and over.