Need help with kayfun lite plus v2

[Lennn]

Anyone know where to get screws replacement for the +/- poles in sg? Mine is ....ed up can't tighten take me a hour to recoil

 

[Rotorthrust]

Anyone know where to get screws replacement for the +/- poles in sg? Mine is ....ed up can't tighten take me a hour to recoil

I can be wrong but I strongly think the inner screw track is gone and but replacing another screw does not help. That happened to be previously but I hope your case is really due to the screw itself and not the inner screw track.

Good luck.

 

[Lennn]

=( anyone knows the diameter of the screw?

 

[Lennn]

Hopefully not the base treads -_-

 

[ozen]

If not mistaken M1.6x0.35mm
http://www.fastener-express.com/m1.6-x-35-x-3mm-pan-phil-machine-screws-stainless-qty-50-1.aspx

 

[Lennn]

Oh Okie thanks I will try to find at those hardware shop

 

[Lennn]

.... I can't find it

 

[nuvole]

http://pansun.com their price could be steep.
You better off order from FT and wait for a few weeks.

 

[Rotorthrust]

Pan Sun Hardware Pte Ltd their price could be steep.
You better off order from FT and wait for a few weeks.

Yah… FT should have the it.

 

[kissthefloor]

Lennn; look at the screws that you have a problem with. do the threads look stripped or "flat"? if both screws are look fine yet both can be tighened securely, the base would be the one having the stripped threads. if that is the case you need to replace the base.

 

[Lennn]

Nope one of the screw have no treading lol

 

[Lennn]

Using kanthal wire to push the screw down currently =(

 

[18sign]

Nope one of the screw have no treading lol

if side is it? if got no treading your female threading might be damage too...

u got check if both the female threading of the connection part is alright?

 

[ozen]

Pan Sun Hardware Pte Ltd their price could be steep.
You better off order from FT and wait for a few weeks.

Yah… FT should have the it.

You mean this? $0.63 Spare Screws for Kayfun Lite Atomizer - stainless steel at FastTech - Worldwide Free Shipping
They discontinued.

 

[Lennn]

Yeap that one

 

[ozen]

Check your local hardware store like Ace Hardware does carry machining screws parts. You could also get it from fastener express or fatdaddyvapes.

 

[Piak]

I am not sure if you will be able to find the screws you want there, but there is a shop at Kelantan Road, and so far, just about any screw I want, I have been able to find at one of the hardware shops there. I forgot the name but there is one shop dedicated to screws there. Just bring the screw you want to find and show it to them.

 

[nuvole]

I am not sure if you will be able to find the screws you want there, but there is a shop at Kelantan Road, and so far, just about any screw I want, I have been able to find at one of the hardware shops there. I forgot the name but there is one shop dedicated to screws there. Just bring the screw you want to find and show it to them.

That's the pan sun hardware I mention. Their price very steep...

 

[kissthefloor]

the material of the screw and the base is different. chances are your female connection is fine. i know because my KF lite from FT came slightly faulty, the insulated post could not be screwed in fully. i kept tightening and loosening the screw until the thread of the screw stripped slightly to the point that i could secure it,

 

[nuvole]

Not sure if the op is talking about original or clone.
If its clone, might as well buy the whole base as its inexpensive.