I need some advice with my setup. My cotton pad (Muji Cut Cotton) keep breaking into half in the middle of the micro coil after vaping 3ml of juice or less.
My setup:
Authentic kayfun Lite Plus v2
Temco Kanthal A1 28awg 1.43 ohm micro coil on 2mm diameter
Cotton cut into strip along the grain with top and bottom layer remove.
ProVari 3 set to 9 watt with boost 2.
Before the P3, I was using Stingray mod clone, it was ok. Vape more then 3ml without fail.
My setup:
Authentic kayfun Lite Plus v2
Temco Kanthal A1 28awg 1.43 ohm micro coil on 2mm diameter
Cotton cut into strip along the grain with top and bottom layer remove.
ProVari 3 set to 9 watt with boost 2.
Before the P3, I was using Stingray mod clone, it was ok. Vape more then 3ml without fail.