Ok i need some feed back here, ive been playin around in a buddys machine shop and am thinkin bout makin a lil somethin somethin, possible even multiple. but want to know What makes a rba a good quality rba Looks? Chamber size? tank size? Ability to dual wick? Any and all input would be helpful and taken into consideration
- Status
All of the above... Everyone has their personal favorites and even among the favorites there are things we, as indibiduals, like and don't like.
My suggestion is to look at what's out there and look at the specific features each of them have and decide what you like and what you don't like.
I recommend using a "take the best and leave the rest" approach. I could give you a list of features that I look for personally, but there will be someone right behind me saying I'm wrong... (and in all likelihood would have a valid reason for believing so). The reality is that you have to build what YOU like, with the features YOU want.
Design by consensus leads to ....ty products. If you build exactly what you want with no compromises, odds are other people will want it too.
Just my 2 cents.
My suggestion is to look at what's out there and look at the specific features each of them have and decide what you like and what you don't like.
I recommend using a "take the best and leave the rest" approach. I could give you a list of features that I look for personally, but there will be someone right behind me saying I'm wrong... (and in all likelihood would have a valid reason for believing so). The reality is that you have to build what YOU like, with the features YOU want.
Design by consensus leads to ....ty products. If you build exactly what you want with no compromises, odds are other people will want it too.
Just my 2 cents.
Some things I'd like to see in a dripper:
Two caps. One bigger for either a dual coil and/or drilling two airholes for dual coil, or for having the option of a bigger chamber vape and a smaller chamber vape.
Some adjustment of resistance (maybe separate from the actual coil). There's a rather wide margin between, say .9Ω and the 1.3 that will work on a regulated device. I hate when I build something and land on 1.1Ω! Too whimpy for my mech and won't fire on my VV. (If only I could increase the resistance enough to run it on the VAMO)
A cap shape that would accomodate (and an attie that would include) an air hole adjustment/occlusion ring). Translate this idea to an IGO shaped cap . . . .
Nice tall posts with wire holes down low: so you can build in the bottom of the well, or up high (using the post screws at the top). Posts located @ 10 and 2 o'clock. Nothing in the center, nothing on one hole half of the atty.
hmmmmm . . . . . .I'll let you know if I think of anything else.
Two caps. One bigger for either a dual coil and/or drilling two airholes for dual coil, or for having the option of a bigger chamber vape and a smaller chamber vape.
Some adjustment of resistance (maybe separate from the actual coil). There's a rather wide margin between, say .9Ω and the 1.3 that will work on a regulated device. I hate when I build something and land on 1.1Ω! Too whimpy for my mech and won't fire on my VV. (If only I could increase the resistance enough to run it on the VAMO)
A cap shape that would accomodate (and an attie that would include) an air hole adjustment/occlusion ring). Translate this idea to an IGO shaped cap . . . .
Nice tall posts with wire holes down low: so you can build in the bottom of the well, or up high (using the post screws at the top). Posts located @ 10 and 2 o'clock. Nothing in the center, nothing on one hole half of the atty.
hmmmmm . . . . . .I'll let you know if I think of anything else.
Great ideas there; I love the idea of an air hole ring. It should also close completely to prevent leaks. I've thought about adding one to my IGO-L that still leaks if placed in my laptop bag.
I'd add all-stainless construction, an adjustable center post like the A7 but not sloppy, and make it 17mm so it fits on 14500 mods.
Get rid of the 510 connection and make it so it screws on the popular mech mods for a hybrid Dripper.
- Status
Similar threads
