Need OHM & carto recommendations.

[NerdVap0r]

Nemesis clone + IBtanked cartotank (i know.... mechs not for cartotanks).. I'll be using imr AW/Efest 700-800 mah 18350 6A & imr AW 2000 mah 18650 10A. Whats the best average range OHM for my batteries cartomizer wise to get normal throat hit & normal vapor? I dont want massive clouds. Just trying to be safe & last longer without real cigs. I've been recommended these by a few unsure folks. http://www.surevapes.com/Boge-510-LR-Stainless-Laser-Punched--2-hole--5pack_p_440.htm My last concern is will both my 18350 & 18650 mode affect the ohm's in different way?

 

[tmcase]

For some reason your link didn't work for me but from what I can see from the link, Surevapes has the best price for Boge cartos when you buy them in the multi-pak. You can choose the resistance you want for all 5 boxes and yes, the LRs is what you want.

The batteries won't effect the ohms in any way.

Edit: This is an after thought. LR cartos are around 2.0 ohm. For me that is too high for a mech mod. It might be fine for you but if you want to get more power and better flavor you might consider getting a Kick 2 if it will fit in the Nemisis clone. I believe the inner diameter of the mod tube has to be at least 19.5mm. It will add a level of safety also because it acts like a fuse in case of a short. Just a thought.

 

[Stosh]

Mech mods are fine for cartos, or any other toppers. The voltage is set (regardless of the size of your battery) at 4.2 volts fresh off the charger and 3.7 volts nominal. The trick is to get the vapor and warmth you like, you need to vary the resistance of the carto used, as the voltage can't be changed.

For a mech a range of 1.8 ohms to 2.5 ohms are used by many vapers. You should try a couple different value resistance to see which you like best for the e-liquid you are using.