need opinions

[mcorrade]

Ok so I got the Joye 510 and it's been about two weeks now and it's ok......I love the manual battery and the PCC works great. My only problem with the 510 is I seem to have to double and even triple drag to get the amount of vapor I like. I see these guys on utube doing a single cheek to lung inhale and getting a lot more vapor than I do.

So the question is there a better system or at least one that will give me more vapor?
Also what is "direct drip" and will that give me more vapor?

thanks a milliom

-mike

 

[Genom]

Direct drip is basically bypassing the filler material, and just dripping onto the atomizer itself. I am not a fan, although it does tend to produce more vapor. A major thing I have noticed is just the juice makeup affecting vapor. I have some flavors from Tasty Vapor like Bananas Foster that makes very little vapor, but Atomic Cinnacide makes clouds of it.

There is also a small chance you got a bad atty as well.

 

[cyberwolf]

On a 510 with a regular atty, your best bet for more vapor is going to be using some VG mix. Even with 80PG/20PG you will see a noticeable increase over straight PG. Make sure you're taking long slow draws.

 

[beandean]

i debridged and dewicked my 510 ego atty, it hits and blows vapor tremendously,i just bought a low resistance atty for mine also and i would say that the modded atty blows it away!

 

[classwife]

Like cyberwolf said...longer, slower draws....can't draw like on a cigarette.....take your time, enjoy it...(it's not going to burn away).

 

[cskent]

Long slow drags lasting like 4 or 5 seconds are the key. Also, hit the button about a second before you take a hit and you'll get more vapor. If you're using cartridges make sure they're not running dry. After a day or two the filler material (white cottony stuff) in a cartridge will get packed down so it doesn't make contact with the bridge of your atomizer. It needs this contact to wick liquid out of the cart. You can revive it by fluffing up the filler with a pin or other small sharp object. That'll keep it working a little longer but eventually you'll just have to replace the filler.

 

[Justy Roost]

There are a lot of mixes of liquid, atomizer, cartridge and batteries in play aren't there. mods too. Then there's always adapters with atom/cart or cartoms from other styles to consider, besides the whole dripping thing.

 

[dormouse]

I recommend Boge soft cap standard resistance cartomizers for 510

I am getting a huge load of vapor with them on my 510. Occasionally the drag gets tight and I just remove the cap carefully straighten the central air channel so I can see light through it.

And of course juices with some VG in them if you want the vapor to last through exhale - I like 70pg/30vg

And I use a plastic 510/901/KR8 drip tip instead og the white end cap - not to drip in (since juice would aim for the air channel), just as a nice easy-to-remove mouthpiece with a bigger airhole. I get great reuse out of the Boges.

 

[DyceJ]

I had the same issues at first but after talking to some people I was informed of the difference between PG and VG. Based on the info others have given me, PG will give more flavor and a stronger throat hit where as VG will produce more vapor. The most desireable seems to be a mix of both. I am currently using juice from juicy vapor and they have a reduced PG blend that gives good flavor and vapor. I'm sure the best way would be to mod your atty but i haven't really messed with mods yet.

 

[Higbe33]

cskent - Some fantastic advise about pressing the button for 1 second before draw. Big difference....... thanks.

 

[dormouse]

Oh yeah - definitely

When the atomizer or carto is already warm, a 1/2 second may do, of really cold it may need 1.5 seconds. And you can life you finger off the button slightly before the end of your drag since vapor is already made.

 

[MajorBedhead]

I've been doing that lift the finger thing (man, that sounds kind of raunchy) and it help. I also have a low resistance drip tip on mine. I can't stand the filler stuff. Tastes burnt after a couple of drags.

 

[mcorrade]

Thanks to all. You guys really know how to work a forum. Most of the suggestion I kind of figured out but didn't know about VG producing more vapor than PG.

Let me ask you guys this, I bought several different flavors already but they weren't designated VG or PG. What the standard of not known? VG or PG. I'm guessing PG.....

thanks,
-mike

 

[MickeyRat]

Let me ask you guys this, I bought several different flavors already but they weren't designated VG or PG. What the standard of not known? VG or PG. I'm guessing PG.....

Depends on where you got it. It's probably Dekang or another Chinese brand. In that case, it's probably all PG. A lot of sites let you specify. Popular ratios are 80/20, 70/30, and 50/50. After that you're usually talking about someone that's sensitive to PG and they go all VG.

 

[melloyello]

a perfect combo would be to smoke like your sucking a diesel engine that hits the back of your throat like a sonofagun