need some clarifications on my GGTS

[tonyfalkon]

2 years ago I was fortunate enough to get a GGTS, since I used mostly 801's and 510's I was content with what I have. Recently though I saw the GGTS wiki and on the specs it says that the Rev 1 models have a 4-in-1 Connector allows to use 901, 510, 801 and 808D type atomisers and cartomisers. I tried fitting mine with 901's and 808d's but it won't, now I'm stuck with a bunch on them and still can't fit them in the so called 4-in-1 connector. Here is what my GGTS looks like

Am I missing a piece, was the original cap connector been replaced or cut, what am I missing here. It also crossed my mind that this might be a fake but I looked at the serial number database and the person I bought it from is still the one written there.

If this has been discussed before, please direct me to the right thread.

 

[fright88]

I believe you will need a rethreader to use 901 and 808 stuff.

 

[lawnman3]

yep he is correct tony...

dont go and buy one though i have a few sitting around here that i will never use ...

lawnman3...

 

[tonyfalkon]

Will you be attending the Aug 18 meet at AJ's can you bring one so I can see what this re-threader looks like.

yep he is correct tony...

dont go and buy one though i have a few sitting around here that i will never use ...

lawnman3...

 

[tonyfalkon]

I believe you will need a rethreader to use 901 and 808 stuff.

TY for the quick reply I'm just confused because I thought all First Edition GGTS have 4-in-1 connectors or is that in Revision 1 ???

 

[cypresss]

The connector you have is correct, but it is only 4-in-1 with the rethreader. Without it, you can only use 510 (306) and 801. Here's a pic.

http://www.cloudsofvapor.com/compon...ge/product/Thread_Adapter_f_4d81ac7f1f0b3.jpg

 

[sedge]

This video shows your model and the rethreader in use
http://www.youtube.com/watch?v=6AcMsJEt_y0&feature=youtube_gdata_player

 

[RiverNut]

The connector you have is correct, but it is only 4-in-1 with the rethreader. Without it, you can only use 510 (306) and 801. Here's a pic.

http://www.cloudsofvapor.com/compon...ge/product/Thread_Adapter_f_4d81ac7f1f0b3.jpg

So, it's not really a 4 in 1 connector if you need an adapter. Please excuse my ignorance but couldnt any connection be a 4 in 1 with the right adapter?

 

[fright88]

So, it's not really a 4 in 1 connector if you need an adapter. Please excuse my ignorance but couldnt any connection be a 4 in 1 with the right adapter?

As far as I know they came with rethreaders. I coule be wrong about that but the 3 new GGTS I have bought all came with them and my 4 in 1 connector cap I got used came with one as did all but one of the used GGTS I've bought. However I have gotten 1 ggts and 1 4 in 1 cap that didn't but the sellers told me they had misplaced them. That being said I believe it is advertised as such because it normally comes with everything you need to actually be 4 in 1.

 

[cypresss]

So, it's not really a 4 in 1 connector if you need an adapter. Please excuse my ignorance but couldnt any connection be a 4 in 1 with the right adapter?

Not exactly. You would need multiple adapters. That is unless the device you're using has a floating pin which is long enough and has enough travel to accommodate the different attys.

I can't believe, with all of the GG copying that's going on, this design hasn't caught on. Many devices can't use the floating pin, so that's most likely why.

 

[imeothanasis]

its a real 4 in 1 connector buddy. You can use 510 atomizers, 801 atomizers, cartomizers (it has a small cut on the head of the center pin and 4 holes around the connector) and 901 atomizers. To use 901 atomizers you need a rethreater. Rethreater is not an adapter, its only a small empty tube that changes the 510 threads to 901 threads. The moving pin let all atomizers's center poles to meet it

So, it's not really a 4 in 1 connector if you need an adapter. Please excuse my ignorance but couldnt any connection be a 4 in 1 with the right adapter?