Nemesis clone questions

Status
Not open for further replies.

schapiro72

Senior Member
Jun 20, 2014
133
11
Buffalo,NY,USA
I just purchased a Nemesis clone and have a few questions. I dont see a button to engage the device. How do you get vapor to come out?
I am going to either use a vape safe fuse or a wattage kick and not sure which one to use.
If I use the fuse which is rated at 7A that I have to be careful with the resistance of the coils in order not to exceed 7A. If the fuse protects the device from exceeding 7A should I just use 10A batteries and not 30A.

Not sure how the kick works. How does changing wattage change your voltage?
I also need some advice on a RBA. Looking at a Ehpro kayfun Lite plus clone.
 

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago
I just purchased a Nemesis clone and have a few questions. I dont see a button to engage the device. How do you get vapor to come out?
I am going to either use a vape safe fuse or a wattage kick and not sure which one to use.
If I use the fuse which is rated at 7A that I have to be careful with the resistance of the coils in order not to exceed 7A. If the fuse protects the device from exceeding 7A should I just use 10A batteries and not 30A.

Not sure how the kick works. How does changing wattage change your voltage?
I also need some advice on a RBA. Looking at a Ehpro Kayfun Lite plus clone.

1: The button is at the bottom. Makes it easy to replace.

2: Use the kick; either a wattage or voltage kick; if you are building your own coils I recommend a voltage kick set to 3.7v and match your resistance to suit.
Or better yet get a few kicks to keep options open.

3: There are resetable fuses; they reset instead of blowing completly.

4: When in doubt use the high drain sony vtc5 30 amp.

5: wattage kick sets the voltage for you depending on what wattage you want and what ohms it sees on top.
 

Ryedan

ECF Guru
ECF Veteran
Verified Member
Mar 31, 2012
12,869
19,652
Ontario, Canada
I just purchased a Nemesis clone and have a few questions. I dont see a button to engage the device. How do you get vapor to come out?
I am going to either use a vape safe fuse or a wattage kick and not sure which one to use.
If I use the fuse which is rated at 7A that I have to be careful with the resistance of the coils in order not to exceed 7A. If the fuse protects the device from exceeding 7A should I just use 10A batteries and not 30A.

Not sure how the kick works. How does changing wattage change your voltage?
I also need some advice on a RBA. Looking at a Ehpro Kayfun Lite plus clone.

Most of your questions already got answered. I agree with Sucker_dad that you really should read a bit more about mech mod safety issues. This is a great link to a whole lot of info on it all: One Stop Reference Shop For New and Experienced Vapers. You can pick your topics, it's not just a long post about all of it.

I suggest you at least read the second group of links that start with 'Battery Info 1 Thanks to Baditude'.

As for battery choice, you will generally get longer run time with Sony 18650VTC5 30A batteries than you will with any of the 10A batteries. Plus you get the bonus that they are also safe for higher amp use.

Vape safe :thumb:
 
Status
Not open for further replies.

Users who are viewing this thread