Nemesis style mod vs clone?

Status
Not open for further replies.

Jomiz

Super Member
ECF Veteran
Verified Member
Mar 1, 2014
408
305
Alabama
I have a nemesis clone, love it! I also have an Igo-l got it as my first rda, honestly i would have went with something else right off the bat if i had a chance to try out something else first, like the trident or omega.

got to Buy Electronic Cigarettes | E Cigs For Sale | Angel Cigs Online Store similiar prices as FT but they have a usa warehouse so no long wait from what i hear
 

kamil99

Senior Member
ECF Veteran
Verified Member
Apr 24, 2013
216
133
Knoxville, TN
I really like the look of an omega but I haven't tried any of these. Also is a dripper for nicotine in a atomizer!


Sent from my iPhone using Tapatalk

For nicotine? I think you may be getting too deep into the pool. Might wanna pull the reins towards a head based tank or something like that. Drippers are a rebuild able atomizer.

sent by my mind.
 

joecil

Super Member
ECF Veteran
Verified Member
Jan 9, 2014
565
203
Russell Springs, Kentucky
My cart at fast tech has a Nemesis Style Mod and an IGO-L RDA. Any other suggestions before I checkout?


Sent from my iPhone using Tapatalk

I suggest the Omega dripper over the IGO-L. Advantage is thee Omega is 22mm, can be single or duel coil with air flow for either of the configurations. The IGO-L you might need to drill out the air hole and it is 21mm wide which means it won't sit flush with the sides.
 

Completely Average

Vaping Master
ECF Veteran
Jan 21, 2014
3,997
5,156
Suburbs of Dallas
Yeah I just woke up and my mind clearly isn't working yet haha. What are your feelings on mech vs APV?


I'll take a mech with a Kick/Kick2 over a VV/VW mod any day.

Smaller, fewer parts to break, if the Kick module fails it can easily be removed and the mod still works, and if I want I can remove the Kick and run subohm coil builds that VV/VW mods will not work with.


The exception to this would be a device that runs the DNA30 chip. Those are regulated and can run most subohm builds as well, but they're expensive and hard to find.
 

SingedVapor

Super Member
ECF Veteran
Verified Member
Mar 31, 2014
853
1,287
32
Valdosta, Georgia, United States
My cart at fast tech has a Nemesis Style Mod and an IGO-L RDA. Any other suggestions before I checkout?


Sent from my iPhone using Tapatalk

Hello saint. The Nemesis clone for getting your feet wet. It was my first mod and I still love it. The Igo-L is also another great starter RDA. One more suggestion/info I have about the nemesis is 2 problems I personally have and have seen mentioned. When using the Nemesis clone with a flat top battery (in my experience) firing it can be a little finicky at times. You have to really mess around and perfectly adjust the contacts to find the sweet spot or you will get a lot of miss-fires. Problem number two comes with the switch. The switch has given a lot of people problems, as over time it tends to unscrew itself and the spring is just.... Crap to say the least. Now If you want to get the nemesis clone I would suggest going to fatdaddyvapes and getting the nemesis ultimate upgrade. It comes with longer contacts, and a magnetic upgrade for your switch. Basically its two little circular magnets that you replace the spring with. Makes the switch niiiiiice and smooth. :D


Sent from my iPhone because I'm awesome like that.
 

SaintMirage

Full Member
Apr 12, 2014
43
1
Pittsburgh
Hello saint. The Nemesis clone for getting your feet wet. It was my first mod and I still love it. The Igo-L is also another great starter RDA. One more suggestion/info I have about the nemesis is 2 problems I personally have and have seen mentioned. When using the Nemesis clone with a flat top battery (in my experience) firing it can be a little finicky at times. You have to really mess around and perfectly adjust the contacts to find the sweet spot or you will get a lot of miss-fires. Problem number two comes with the switch. The switch has given a lot of people problems, as over time it tends to unscrew itself and the spring is just.... Crap to say the least. Now If you want to get the nemesis clone I would suggest going to fatdaddyvapes and getting the nemesis ultimate upgrade. It comes with longer contacts, and a magnetic upgrade for your switch. Basically its two little circular magnets that you replace the spring with. Makes the switch niiiiiice and smooth. :D


Sent from my iPhone because I'm awesome like that.

I think you have me this advice on another thread that I started and I actually looked everything up and was about to buy it! I was considering using an omega instead of the IGO-L though.

But then I realized I know almost nothing on mechs and I'm not sure if i could figure it out on my own since I don't have many friends who seriously vape.


Sent from my iPhone using Tapatalk
 

Gonzi

Super Member
ECF Veteran
Verified Member
Feb 6, 2014
484
300
Marietta, GA, USA
I think you have me this advice on another thread that I started and I actually looked everything up and was about to buy it! I was considering using an omega instead of the IGO-L though.

But then I realized I know almost nothing on mechs and I'm not sure if i could figure it out on my own since I don't have many friends who seriously vape.


Sent from my iPhone using Tapatalk

What do you mean you don't have many friends who seriously vape? You have YouTube and this forum, what more could you want in a vaping friend?
 

SingedVapor

Super Member
ECF Veteran
Verified Member
Mar 31, 2014
853
1,287
32
Valdosta, Georgia, United States
Very true but it's always easier whenever you have someone with you hahah.


Sent from my iPhone using Tapatalk

Well you have multitudes of people here who are more than happy to help. If you have any more questions feel free to PM me and I will help as much as I can. :D


Sent from my iPhone because I'm awesome like that.
 

Gonzi

Super Member
ECF Veteran
Verified Member
Feb 6, 2014
484
300
Marietta, GA, USA
I don't know if you have any vape shops in your area, but if you do, that's a good place to get your hands on gear before you buy, and many of them have free rebuildable clases that will help you learn hands on how to build a proper coil and what to look for to make sure you don't have any hotspots or shorts. It's also a good place to make new face to face vape friends.
 

2naphish

Ultra Member
ECF Veteran
Verified Member
Dec 24, 2013
1,254
997
the boro, Tennessee
I suggest the Omega dripper over the IGO-L. Advantage is thee Omega is 22mm, can be single or duel coil with air flow for either of the configurations. The IGO-L you might need to drill out the air hole and it is 21mm wide which means it won't sit flush with the sides.

best to do a lot of research before buying your first dripper. i personally would not suggest the Omega as a starter. i is very difficult to build in comparison to a lot of other drippers. wrapping wire around the posts and getting it right can be time consuming and frustrating for a new user. any quality RDA with adequate post holes would be much better for a person that probably will do a lot of builds trying different wire and getting the OHMS they want. i also second the opinion about the adjustable airflow (very nice). the Brass Monkee is hard to beat. i don't know about the clones but i think they will be available soon ( as if anyone could wait to get started LOL!)
JMO for what it is worth. <*}}}>{
 

PirateHooligan86

Senior Member
ECF Veteran
Verified Member
Apr 16, 2014
209
247
Florida
It is the same, and I'm happy to tell you that I have a Reo mod, Hades Clone, Nzonic, Maraxus, and Nemesis Clone, and the Nemesis Clone (by HCigar) that I have hits harder than anything else I own. I've tried it next to an authentic Nemesis and it seemed like it actually worked better. I am VERY impressed with it. I recommend it to everyone, ha ha.
 
Status
Not open for further replies.

Users who are viewing this thread