New Bulli In America "Review"

Status
Not open for further replies.

scintar

Super Member
ECF Veteran
Mar 21, 2009
359
6
Pinellas Park FL
I say hello to the creator of the bulli !
Ok for your answer ! so 6V is only for people who have lot of money to buy lot of ato !!! The other problem with 6V is the rapid burning taste if i stay to long on the buton
Yes Aline, at 6v you have to be easy with the button. A lot of power gets hot quick. Takes time to learn.
Good to see you back.
 

franklyspeaking

Ultra Member
ECF Veteran
Mar 17, 2009
1,231
48
Arlington, Texas
www.pharceapp.com
I won't speak for Wegster but I think his question is valid. It's one thing to do a review it's another thing to be a manufacturer or affiliated with a manufacturer and list a review under the guise of a unbiased 3rd party. He asked about the picture because he understandably questioned it.
 

scintar

Super Member
ECF Veteran
Mar 21, 2009
359
6
Pinellas Park FL
I won't speak for Wegster but I think his question is valid. It's one thing to do a review it's another thing to be a manufacturer or affiliated with a manufacturer and list a review under the guise of a unbiased 3rd party. He asked about the picture because he understandably questioned it.
I have been on German forums and have seen the bulli, Like what i saw and purchased it. Yes i have been in contact with the German manufacturer as i am the first to introduce this to the American public forums. At the present time I don't sell the Bulli. BUT I may as it seems people want to know about it so much.
 

korun

Unregistered Supplier
Jul 11, 2009
3
0
Germany
www.bulli-smoker.de
  • Deleted by ZambucaLu
  • Reason: unregistered supplier/posting in reviews board

wegster

Ultra Member
ECF Veteran
  • May 10, 2009
    1,324
    14
    NC
    #1 I don't know why it is so important for you to have this information so bad? I see your posting in the GG forums as I type. What is your problem?
    I may have these models or I may not? No one is claiming anything better than anything else. I am simply showing a older but yet new to American forums a product that I happen to be using for almost a month. It is a nice device worthy of a review. As to the picture you are referring to. No I don't have all these models but, These models exist and should be noted.

    #2 Any other questions????

    You apologized for downtime on the pics, therefore you have vested interest, or so it seems. You defensiveness seems to prove it.

    As such, I suggest you register as a supplier, per ECF rules, and you not pose as a 'user.'

    I don't speak German, so can't speak to your 'comparisons.' If someone spammed the forum with what seems to be a pre advertisement, and had a 'Bulli vs Prodigy' video linked, I would do the same.

    I own neither the GG, Bulli, nor Prodigy. However, as stated, this looks like an ad, not a review, by unregistered suppliers, and is somewhat misleading.

    So then, if you're instead a user, you're apologizing instead for someone *elses* pic downtime? And then have done no pics of the units yourself?

    Again, just seems fishy from this side. Take a step back and perhaps you'll understand why. That's also why I asked, however, and then when you ignored it, I clarified.

    Any other questions? :rolleyes:

    BTW, I also post on NHaler, innovapor, EM, Puresmoker, Janty, and others. Was there a crime in that?

    I'm sure someone will supply a link, but check the Suppliers forum for a big sticky entitled 'unregistered suppliers please read.'
     
    Last edited:

    wegster

    Ultra Member
    ECF Veteran
  • May 10, 2009
    1,324
    14
    NC
    Thanks for the explanation, korun.

    Here are some links for you, SJ or one of the Staff should get you fixed up.
    http://www.e-cigarette-forum.com/fo...rum/12433-unlisted-suppliers-please-read.html
    http://www.e-cigarette-forum.com/fo...ers-forum/1334-suppliers-rules-must-read.html
    http://www.e-cigarette-forum.com/fo...rs-forum/2528-suppliers-please-get-touch.html

    @scintar - would love to see an actual video review, by you. Planning one any time soon? Hopefully the 'misunderstanding' is resolved now, but I do prefer my reviews to be video and in English..although I am German, sadly, I don't speak the language :)
     

    ZambucaLu

    ECF Guru
    Supporting Member
    ECF Veteran
    Nov 23, 2008
    10,262
    22
    Central NY, USA
    OK, let's back the truck up for a minute.

    1) Korun has to be approved as a manufacturer/supplier before he can post here. He can PM me with his site link so it can be reviewed.

    2) As a m/s, he is not allowed to post in the reviews board....so all his posts here right now have to be deleted.

    3) Scintar, if you are planning on selling these then yes, we would consider you have a vested interest and your reviews would not be appropriate.

    Not too long ago there was a big uproar about a member posting great reviews on products he was ultimately going to sell and we don't want to have to go through that again. So yes, we do need to know if this is going to be the case.

    So let's get this all straightened out before we go further with the reviews, shall we?

    Lu
     

    scintar

    Super Member
    ECF Veteran
    Mar 21, 2009
    359
    6
    Pinellas Park FL
    You apologized for downtime on the pics, therefore you have vested interest, or so it seems. You defensiveness seems to prove it.

    As such, I suggest you register as a supplier, per ECF rules, and you not pose as a 'user.'

    I don't speak German, so can't speak to your 'comparisons.' If someone spammed the forum with what seems to be a pre advertisement, and had a 'Bulli vs Prodigy' video linked, I would do the same.

    I own neither the GG, Bulli, nor Prodigy. However, as stated, this looks like an ad, not a review, by unregistered suppliers, and is somewhat misleading.

    So then, if you're instead a user, you're apologizing instead for someone *elses* pic downtime? And then have done no pics of the units yourself?

    Again, just seems fishy from this side. Take a step back and perhaps you'll understand why. That's also why I asked, however, and then when you ignored it, I clarified.

    Any other questions? :rolleyes:

    BTW, I also post on NHaler, innovapor, EM, Puresmoker, Janty, and others. Was there a crime in that?

    I'm sure someone will supply a link, but check the Suppliers forum for a big sticky entitled 'unregistered suppliers please read.'
    I had been in contact with mods about supplier status here on the forums. Yes i have sold dse products. Never solicited a single member here. I have pleanty of local traffic. I posted a mini review of a product worth noteing and had apologized that the picture went down. That is all.
    In the review I did advertise and did not compare to or mislead anyone. I simply told about a product that all have never seen before. I just happen to see you in the GG foruElse'sms when you had questioned my picplentynotingtire. Remember GGpicture 'comparison' is kind of a poor joke?
     

    scintar

    Super Member
    ECF Veteran
    Mar 21, 2009
    359
    6
    Pinellas Park FL
    OK, let's back the truck up for a minute.

    1) Korun has to be approved as a manufacturer/supplier before he can post here. He can PM me with his site link so it can be reviewed.

    2) As a m/s, he is not allowed to post in the reviews board....so all his posts here right now have to be deleted.

    3) Scintar, if you are planning on selling these then yes, we would consider you have a vested interest and your reviews would not be appropriate.

    Not too long ago there was a big uproar about a member posting great reviews on products he was ultimately going to sell and we don't want to have to go through that again. So yes, we do need to know if this is going to be the case.

    So let's get this all straightened out before we go further with the reviews, shall we?

    Lu
    No problem on this end lu, I just got hammered with which I thought was unworthy questions. I do not sell the bulli and If and when I do I will go through the proper channels. :)
     

    wegster

    Ultra Member
    ECF Veteran
  • May 10, 2009
    1,324
    14
    NC
    @scintar - if you go reread your posts, plus posts of every single video in creation on the Bullis, then apologies for downtime, plus pics of all models..I don't know how much simpler it can be. If you truly don't understand the concern there...I seriously doubt any further conversation will clarify it. Sorry if you believe that 'unworthy' somehow. I'm sure others might see if you ever *do* sell them, that perhaps this entire thread has been nothing but 'hype for future sales,' but you know, people are silly online, and all that, right? :D

    Either way, I'd be happy to see Bulli's available with actual adapters, and some importial English reviews, and will look for them in the future. :)
     

    ZambucaLu

    ECF Guru
    Supporting Member
    ECF Veteran
    Nov 23, 2008
    10,262
    22
    Central NY, USA
    No problem on this end lu, I just got hammered with which I thought was unworthy questions. I do not sell the bulli and If and when I do I will go through the proper channels. :)

    OK, well, since the possibility exists that you may end up selling them, this review can't continue.

    Perhaps you can talk with Korun and get a better idea. If the answer is "I will sell them if I get enough interest here", then yes, we would have to consider you at least an affiliate at this time, until we get a more definitive answer from you.

    Sorry, but we really don't want to go through again what we went through before with a reviewer coming to sell the products he reviewed.

    So please let me know what you decide. Meanwhile, this thread is closed.

    My personal suggestion: do what you need to get your website up to ECF standards (as you and I have already discussed), become a supplier here....and you can advertise away.

    But as previously mentioned, Korun would also have to do this before he can promote his product here himself.

    Thanks,
    Lu
     
    Status
    Not open for further replies.

    Users who are viewing this thread