NEW GG Products very confused!!

[imeothanasis]

No reason for now to increase the cost if you agree Pain. In near future maybe we will find a reason to do this

Best is to have both the stainless steel driptip and the new UFS cap I love both and i switch around whenever i want to.

 

[AdamAnd]

This has turned out to be alot of great information Thanks everyone Time to hide some money and get another UFS thanks imeo i can't wait!

 

[AldoApache]

If you excuse me I'll hijack this thread and ask...
What about the GG 4S? Will you unveil something about it soon? ;P
Greetings

 

[imeothanasis]

I thank you too Adam

Aldo, as you see I have to make some things first. I made the nessesary parts to support existing customers like you and all the others, something that is the most important to me. After this I have to make the Iatty2. I would really like to make the GG4S but before I will start making it I will run out of other things, so I have to start making them again. I have too many ideas but its impossible to make all of them true. Designs for GG4S are ready and they sit inside the hard drive on my PC looking at me.!

 

[zuTma]

I say go with steel connector

Just want to cue on this.
I really like using UFS connector with my iatty, it excludes the need for adapter, and iatty is flush with lid.
Although I'm feeling discomfort every time when I'm screw it in.

 

[blackwater]

Sorry for the stupidity here. When I order my new UFS what will I need to buy for attys and tip. I use the 510 and extender with your black tip right now. What will I need to change in preparation for vaping my new one?

Thanks Imeo!!

 

[Painfreak]

No reason for now to increase the cost if you agree Pain. In near future maybe we will find a reason to do this

True, I believe everyone would be happy with what is being send out. Upgrade can be done slowly. The Best thing is to have a chance to use the great tank mod - UFS

 

[fright88]

Sorry for the stupidity here. When I order my new UFS what will I need to buy for attys and tip. I use the 510 and extender with your black tip right now. What will I need to change in preparation for vaping my new one?

Thanks Imeo!!

Sounds like with the new topcap all you will need is your atty of choice and a drip tip or UFS tip.If you want to use 901 threaded stuff you will need an adapter as well.

 

[fright88]

No reason for now to increase the cost if you agree Pain. In near future maybe we will find a reason to do this

I am glad you are thinking this way. IMHO I don't really like metal tips. They look better but I still prefer plastic. As for the metal window personally I would prefer the clear one that is one of the things I wish I had for my AVS and I considered making one for my iAtty but decided against it. However the plastic/glass windows are cheap and if it comes with a metal window and I buy a clear seperate at least I know even if I somehow strip the plastic I will have the metal to fall back on.

 

[blackwater]

Sounds like with the new topcap all you will need is your atty of choice and a drip tip or UFS tip.If you want to use 901 threaded stuff you will need an adapter as well.

So the old UFS tip will work without the new top cap? Or do I have to buy a new UFS tip for new UFS. I love the UFS plastic tip. Not a metal fan.

 

[fright88]

I believe you just screw off the new topcap if you want to use the old style mouthpiece

 

[eyebrook]

Very interesting reading guys, I like to keep up with the news

 

[blackwater]

Saweeeet. Love it!

 

[lorderos33]

iAtty 2 is still just a glimmer in Imeo's eye. Or pre prototype so we probably won't get specifics until it is finalized. I also have a burnup problem as no matter which wick I use I get burnt juice buildup in under a day.

As for the new UFS it is basically the old UFS but it will come with the new top cap instead of the mouth piece so you will be able to use your own drip tips and also use any length atty or carto.

Burnt juice buildup means not enough heat. You need more wattage and a sturdier wick to deal with the increased heat. At 3.7 volts don't go higher than 1.6 or 1.7 ohms. At 6v almost any resistance that can fit into the ceramic will work nicely (not too low or you'll catch it on fire though, lol.

 

[imeothanasis]

I never thought of that Zu, nice trick!!! It makes GGTS 4mm bigger but why not?

Just want to cue on this.
I really like using UFS connector with my iatty, it excludes the need for adapter, and iatty is flush with lid.
Although I'm feeling discomfort every time when I'm screw it in.

 

[imeothanasis]

I see your point fright about glass window. On the other hand, metal window is easier to be used in small UFS configuration without the danger to ruin its threads by screwing - unscrewing the refilling cap like it may happen with glass window if you agree. But maybe I can make glass windows and send it as a gift to my customers or to charge it at 3 euros only? So UFS will be at +3 euros and people will have both options?

I am glad you are thinking this way. IMHO I don't really like metal tips. They look better but I still prefer plastic. As for the metal window personally I would prefer the clear one that is one of the things I wish I had for my AVS and I considered making one for my iAtty but decided against it. However the plastic/glass windows are cheap and if it comes with a metal window and I buy a clear seperate at least I know even if I somehow strip the plastic I will have the metal to fall back on.

 

[Dalton63841]

Okay I am apparently very confused about UFS configurations... There is a "short" configuration? How much shorter is it than normal? The only reason I don't get the UFS is because of the size.

 

[imeothanasis]

if you take off the sleeve after glass window you will earn almost 1/4 on its total length Dalton

 

[Dalton63841]

if you take off the sleeve after glass window you will earn almost 1/4 on its total length Dalton

Where is the in depth info about the UFS located? I'd really like to see more about possible configurations and how it works and dimensions.

 

[RippleInStillWater]

I see your point fright about glass window. On the other hand, metal window is easier to be used in small UFS configuration without the danger to ruin its threads by screwing - unscrewing the refilling cap like it may happen with glass window if you agree. But maybe I can make glass windows and send it as a gift to my customers or to charge it at 3 euros only? So UFS will be at +3 euros and people will have both options?

I'm liking the gift idea more tbh, Imeo!!!

The short configuration refers to the part between the window and top cap -- it can be removed to make the UFS shorter with an accompanying decrease in capacity.