new guy having trouble with smok m80 plus

[tony7432]

according to its instruction booklet its compatible from 0.1 ohm..i just received the atlantis 2 which has a 0.3 ohm coil installed so shouldnt its be ok? i keep getting a message on the box saying check atomizer and its reading 0.00 ohms, shouldnt it be reading 0.15 ohms?

 

[redrebel821]

And you run into the ONE person who tootle puffs...lol....it shouldnt be reading 0, and I know nothing about about your unit. Let's get you to 5 posts and we can get you into the sub forum.

 

[Ou2mame]

Your positive pin isn't making contacti with the tank. I'm not familiar with either so I don't know if their pins are adjustable but some of mine are, mods and tanks. So start there.
Or the coil is doa

 

[paulparnham]

its a smok.
friend of mine had 1 for a day and it broke.
he exchanged it for a sigelei 100w
smok are cheap for a reason

 

[CloudyWithChanceOfVape]

ALSO, the coil could be shot, hence the 0.0 resistanse. It could be broke, bent, touching the metal and grounding out, ANYTHING. The ONLY wy to know, is changing the coil to see if it is the MOD, or just a bad coil.

Elementary my dear Vapers, Elementary. "Never replace the motor before you check the fuse box."

 

[tony7432]

damn i feel so stupid lol, in worries of over tightening the threads and damaging them on the tank i had not made it tight enough and it was not reading the coil.. everything is fine now..its reading 0.16 ohms..

 

[paulparnham]

you said you have a 0.3 ohm coil in your atlantis2 ?
how can it be reading 0.16?
something's not right

 

[Noserenity]

It's not ok if it's reading 0.16 on an atlantis 2! Check all the connections again Tony, also open the tank and make sure the coil head looks ok and is seated properly. Aspire has gotten pretty good about the QC of their coil heads, a big change from a while back, but it is entirely possible that you have a bad coil right out of the package.

 

[tony7432]

Im sorry your right 0.16 was not right, its currently reading 0.33 ohms