new guy on the forum

Status
Not open for further replies.

fluffie

New Member
Jan 30, 2015
4
0
Hey everyone im pretty new on the forum. I picked up a ego twist and some cheap disposable tanks back in December. The first week i went from a pack a day smoker to 5 a day and ive worked my way down to just 2 a day in 3 months. The ego started falling apart on me in early February so i desided to go with the 1300mah x6 batteries and a pt2 and aerotank. For the most part i like the setup. i love the aerotank but the base seperated about 3 weeks ago which from what i understand is common for the original base. I ordered 2 v3 acvs 10 days ago for the pt2 and aerotank. I loved the upgrades to both tanks right up until the one on the aerotank stoped firing altogether. I have learned alot so far just browsing the forums this is my first post. Cant wait to learn and better my experience from all the knowledgeable people hear.
 

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,693
68
Mpls/St.Paul, MN
Hello and welcome to the forum fluffie. Glad to have you here!:)

Sounds like the center pin of the battery is not making a connection with the atomizer of the clearomizer/tank. This usually occurs from over-tightening the tank onto the battery connector. Just make sure that if you use something conductive (metal) to pry up on the center pin that you do NOT hit the fire button while you are working on the battery. Or better yet, turn off the battery.

Center Pin Issue - Fixing a non firing eGo battery
 

fluffie

New Member
Jan 30, 2015
4
0
Susan i thought the exact same thing but i have the v3 acv on an aerotank and a pt2 the one on the pt2 works fine on both of my batteries. Its the one on the aerotank that just completely stopped working. And when i mean stopped working i was vaping with it and i went for another vape and it wasnt firing. It went from working fine to not working at all in a matter or 2 vapes. At first i thought the coil has burned out on me. I replaced with a new coil and even tryed the same coil in the working base. It fired in the working one fine but not the original. I messed with it for an hour today to try and figure it out with no luck.
 
Status
Not open for further replies.

Users who are viewing this thread