New guy with a problem..

[gregg541]

Have been on here for a couple months browsing and gaining a lil knowledge... Started out with a evod til my buddy showed me the spinner and now I just picked up an itaste 134 mini a couple days ago.... Everything is great except earlier, I changed the battery tube to the 18350 tube while my 18500 was charging.. The 500 is done and I was going to switch it back but I cannot get the battery tube to unscrew now.. Any suggestions to get it off?!

Thank you guys!

 

[NealBJr]

Sometimes when the threads get locked like that, I give it a slight tap against something. Sometimes those threads just lock. I have one mod that the tube gets stuck all the time.. sometimes, so hard that I've put some wide rubber bands around the tube to add grip and just manhandle it open.

 

[Susan~S]

Hello and welcome to the forum gregg. Glad to have you here!

Have you tried using two plyers. Of course, wrap something around both sections of the mod so you don't scratch it.

 

[eyerhere]

Pop it in the freezer for about 15 min then use rubber bands or one of those grippy kitchen jar opener mats.

 

[gregg541]

I've been twisting on it for the last couple hours.. Have it sitting in the freezer now.. Don't know why I didn't think about that... It happened with my protank a month or so ago when I first got it.

 

[gregg541]

Thank you for the help guys... Freezer then nitrile gloves did well!! Thank you again!

 

[Sthur]

Welcome to the forums, glad we were able to help. Anything else let us know.

 

[Wolfenstark]

I have read many times that with many devices you have to be real careful when screwing things together.

 

[Steven G]

gregg Hello and WElcome to the ECF Enjoy

 

[pufZeppelin]

Have been on here for a couple months browsing and gaining a lil knowledge... Started out with a evod til my buddy showed me the spinner and now I just picked up an itaste 134 mini a couple days ago.... Everything is great except earlier, I changed the battery tube to the 18350 tube while my 18500 was charging.. The 500 is done and I was going to switch it back
but I cannot get the battery tube to unscrew now.. Any suggestions to get it off?!

Thank you guys!

toothbrush the threads, wipe them off and apply a little of this

- http://www.autowares.com/images/product/PERMATEX/per-dielectric-400

- http://www.hospitalitybatteryholder...ge/product/Dielectric_Greas_4eee556605f89.jpg

 

[gregg541]

Will do!!! Thanks again guys! Scared me a bit!!! Now I can enjoy my cyborg plasma!!! Mmm!!!!

 

[Slots]

Also, if you don't have anything else handy, rub (or use a Q-tip) a little bit of Vaseline on the screw area of both pieces, and wipe off all the extra.
Don't get sloppy with it
This was recommended by the makers of some really high end vaping equipment.