Hello I'm a new member and also kind of new to the vaping community. I bought a aspire 3500 ma starter kit and recently received a Kangertech mini protank 2 I was wondering if this is a good clearomizer and battery combination also how do you figure out the ohms the aspire has it written on the side but the kangertech does not
New member with questions
- Thread starter kamikazechan
- Start date
- th_trl_thread_readers 0
- Status
I'm not familiar with any aspire 3500 starter battery kit, and a Google search came up with nothing. Can you provide a link from where you purchased this?
The Kanger Mini Protank 2 I believe comes supplied with 2.2 ohm coils. Replacement coil heads are available in 1.8 ohm, 2.2 ohm, and 2.5 ohm.
The Kanger Mini Protank 2 I believe comes supplied with 2.2 ohm coils. Replacement coil heads are available in 1.8 ohm, 2.2 ohm, and 2.5 ohm.
The stock protank coils are 2.5 ohms, but it should be labeled on the side of the coil.
First: you need to find out the output of your battery
Second: you need to find out how many ohms is your coils producing
Third: go on google and type in and search "vaping chart"
Four: use the chart to see if your battery and your tank is a good fit to have optimal vapour production
Hope that helps =D
Second: you need to find out how many ohms is your coils producing
Third: go on google and type in and search "vaping chart"
Four: use the chart to see if your battery and your tank is a good fit to have optimal vapour production
Hope that helps =D
I got it from stormys vapor cellar here in my hometown I just called them and they say it is an Igate 1300ma also known as vision spinner sorry for not doing my research before hand
it is variable voltage from 3.3v to 4.8v
it is variable voltage from 3.3v to 4.8v
it is not labeled on the side of the coil for the protank mini but the one that says aspire on it is 1.8 ohms
Hmm, maybe its just the replacement coils that are labeled then..
Don't worry about ohms, that is one reason for the variable volt / spinner/twist feature.
Start off at a low setting, increase the power while taking a vape or three at each increase, when you find what you like stop turning it up, if you get a burnt taste turn it down.
Start off at a low setting, increase the power while taking a vape or three at each increase, when you find what you like stop turning it up, if you get a burnt taste turn it down.
I have yet to get a burnt taste from either the aspire or the protank
I am missing one of the cables for my multimeter thats part of the reason for my asking
I could do that if I knew the ohms for the protank mini also I'm not too worried about using to much ejuice I love making the huge clouds
Personally I have never seen a Protank coil NOT marked with the resistance. It is very light and perhaps you just need to look a little closer. And where does the Aspire come into this question? Which tank?..... BTW..... Aspire coils are vastly different from a Kanger Protank coils.
Yes the PT Mini is just fine for the Spinner.... Eigate Aspire is the manufacturer/company.....Vision makes the Spinner, so I am really confused on what is what you have
I will assume you were told some information by a less than knowledgeable vape shop clerk!
As for the "chart"...it is a very basic and general reference info...The best way to set the power to the coil/juice, is to set it at the lowest settings, try it, then move upward incrementally until you reach the desired result!
For me, the chart is just another "dart board" I just try to aim at a particular number
For me, the chart is just another "dart board" I just try to aim at a particular number
I was told that eigate makes the battery for vison and my store buys the directly from the wholeseller the aspire coil is a double bottom coil and marked 1.8 ohms I can tell that it is way different from the protank the pull is extremely different the next time use all the e-juice I will take the coil completely out and check all over itPersonally I have never seen a Protank coil NOT marked with the resistance. It is very light and perhaps you just need to look a little closer. And where does the Aspire come into this question? Which tank?..... BTW..... Aspire coils are vastly different from a Kanger Protank coils.
Yes the PT Mini is just fine for the Spinner.... Eigate Aspire is the manufacturer/company.....Vision makes the Spinner, so I am really confused on what is what you have
As for the "chart"...it is a very basic and general reference info...The best way to set the power to the coil/juice, is to set it at the lowest settings, try it, then move upward incrementally until you reach the desired result!
For me, the chart is just another "dart board" I just try to aim at a particular number
thanks for the info I will try that
^This has worked for me so far. I have a Vision spinner and a Kanger EVOD protank (?maybe protank?) and started vaping around a month ago with this basic advice in mind and I hardly miss cigarettes at this point. I have some similar questions to the OP's and I feel like if there is some sort of pictorial glossary or wiki floating around with basic vaping community jargon and terms, I would be well on my way to asking questions more accurately...
Thanks in advance.
Happy vaping
- Status
Similar threads
