New Mod

[Techcafiend]

Hey guys, I am looking to buy a new mod; currently own a provari and have been looking into box mods. I have been looking at the hana modz v3 mini, love the size and overall its a great device from what I have read/seen. What are your thoughts on it, is it worth it? Are there other devices in that price range i should look at, not looking to pick up a clone.

Thanks

 

[DingerCPA]

Welcome Techca. Don't have one of those Hana modz (so not able to comment intelligently), but I did want to welcome you

 

[Circa Survivor]

Can't speak for the real deal, but I have the Cloupor DNA 30 clone and it's amazing for a clone. Nearly identical. I would just pick up a clone to see if you like the way it feels instead of dropping close to $300 on the real thing.

 

[Techcafiend]

Yeah, i have heard some good things about some of these clones; some bad too. Any others try or have a hana modz, how are you liking it?

 

[icky]

Since you already have a working pv, take the time to build one, they are really rewarding when you finish. That's why when you meet a lot of vapers on the street they get all geeked out. I wanted a powerful one with minimal work, so I'm settling with a sx350 in a 1590b hammond case with twin parallel vtc5's.

 

[Wickedgt]

CAUTION!!!

I recently purchased a Cloupor DNA30 (Second Batch). After doing some pretty intense research of various technical reviews, I've noticed a major technical flaw in the Cloupor design. ANY SETTING under 4 volts in UNREGULATED! you'll notice the OHMs blinking when the unit is set to fire under 4 volts. The blinking OHMs reading, is the unit letting you know it is firing UNREGULATED.

I've found if you keep your Wattage settings high enough to keep the unit firing over 4 Volts, you shouldn't have any problems with the Cloupor DNA30 Clone. It's a limitation to the unit, but one you should know in advance so you don't fry your PCB.

Just to be clear... ALWAYS fire your Cloupor DNA30 Clone OVER 4 Volts to keep the unit regulated!

 

[Necrotic]

Since you already have a working pv, take the time to build one, they are really rewarding when you finish. That's why when you meet a lot of vapers on the street they get all geeked out. I wanted a powerful one with minimal work, so I'm settling with a sx350 in a 1590b hammond case with twin parallel vtc5's.

Have somebody building this exact unit for me


ON the other topic: There is a new mod coming out called the Pioneer4You IPV v2. This uses the Yihi SX330 chip and goes all the way to 50 watts. There are quite a few vendors who have it on pre-order. I was seriously debating getting one over the Yihi sx350 chip I'm getting. It costs as low as $79.99 from elev8vapes. Some places a bit more. Do a little research on it. It uses a 18650 battery that you will need to buy. The outside and inside of the mod look fantastic. Unlike some of the cloupors I've seen with some of the messy wirings.

 

[Zanaspus]

Hey guys, I am looking to buy a new mod; currently own a provari and have been looking into box mods. I have been looking at the hana modz v3 mini, love the size and overall its a great device from what I have read/seen. What are your thoughts on it, is it worth it? Are there other devices in that price range i should look at, not looking to pick up a clone.

Thanks

Get another Provari!

 

[Clappingwithonehand]

$56 at fasttech.com. Might have to get one...

 

[Budkiss]

I have decided to step up my vaping experience by moving from a VAMO v5 with a Kanger mega tnak (1.5 ohm) to a new 50 watt iPV2 box mod by greenleaf/pioneer4you. I also ordered two rebuildable bottom (dual) coil tanks... the fogger 4.4 and the yiloong kaiser.

My iPV2 is supposedly on the way. Yahoo. Obsessing and stalking the mailbox.

BTW... If you are getting an iPV2.... I am in communication with two WRAP companies JWRAPS and VAPORSKINZ about a custom wrap for this new mod. They are both working on it. The more inquries direct to them the better. Thanks for shooting them a plea.
admin@jwraps.com
info@vaporskinz.com

 

[Circa Survivor]

CAUTION!!!
I recently purchased a Cloupor DNA30 (Second Batch). After doing some pretty intense research of various technical reviews, I've noticed a major technical flaw in the Cloupor design. ANY SETTING under 4 volts in UNREGULATED! you'll notice the OHMs blinking when the unit is set to fire under 4 volts. The blinking OHMs reading, is the unit letting you know it is firing UNREGULATED.

I've found if you keep your Wattage settings high enough to keep the unit firing over 4 Volts, you shouldn't have any problems with the Cloupor DNA30 Clone. It's a limitation to the unit, but one you should know in advance so you don't fry your PCB.

Just to be clear... ALWAYS fire your Cloupor DNA30 Clone OVER 4 Volts to keep the unit regulated!

Uhhh... That's the same with every dna30 device. You can still fire it under 4volts with no problems.

 

[noifsandsorbutz]

Where did you get it from?

 

[Tangaroav]

I am buying one with coupon 30ff at http://www.elev8vape.com/ipv-50w-box-mod-by-pioneer4you/ as suggested above. I think this is a great deal.