New Setup

[mattmc92]

I ordered myself some new eliquids (moving onto DIY next - another topic all together) in 6mg, because after 2 weeks of vaping I'm moving onto DI or DLI if you prefer. Got myself some berry flavours, that were meant to arrive today, alas they did not and might not arrive for another week !

But, in my excitedness I decided to go out and buy myself a new mod i've been eyeing - an evic vtwo 5000mah and bought myself a crown rose gold tank. I've only heard positives about crown, and trying it today the airflow is huge ! Big plus for me.

All I have is my 18mg tobacco flavoured liquid for my mtl in my melo3.
I have this new toy, and I can't even use it for maybe another week ! The excitement is killing me !

point of query: another vaper on this forum suggested it's imperitive to get a mod with an external 30amp battery if i'm to be using the crown. is this really neccesary? i feel like at 50w, 5V, my new internal battery device should be more than capable of firing 10amp and above (although it's not actually specified anywhere what its max volt & amp capabilities are).

pics to come of my lonely, lonely new plaything.

 

[mattmc92]

Here she is. Sorry flash.

 

[Ajsin11950]

I ordered myself some new eliquids (moving onto DIY next - another topic all together) in 6mg, because after 2 weeks of vaping I'm moving onto DI or DLI if you prefer. Got myself some berry flavours, that were meant to arrive today, alas they did not and might not arrive for another week !

But, in my excitedness I decided to go out and buy myself a new mod i've been eyeing - an evic vtwo 5000mah and bought myself a crown rose gold tank. I've only heard positives about crown, and trying it today the airflow is huge ! Big plus for me.

All I have is my 18mg tobacco flavoured liquid for my mtl in my melo3.
I have this new toy, and I can't even use it for maybe another week ! The excitement is killing me !

point of query: another vaper on this forum suggested it's imperitive to get a mod with an external 30amp battery if i'm to be using the crown. is this really neccesary? i feel like at 50w, 5V, my new internal battery device should be more than capable of firing 10amp and above (although it's not actually specified anywhere what its max volt & amp capabilities are).

pics to come of my lonely, lonely new plaything.

Heya, I feel your pain, I hate waiting... Are there no local vape shops where you are that you could just pick up a small bottle of something to hold yourself over until your order comes in?

On your question there, I'd be kind of curious to see how one of the more experienced people respond. I'm pretty new to everything but after googling the unit and tank I would think that would work just fine.. Like I said though, I'm new to everything here. There could absolutely be something I don't know about that I'm not considering...

Good Luck!

 

[mattmc92]

Heya, I feel your pain, I hate waiting... Are there no local vape shops where you are that you could just pick up a small bottle of something to hold yourself over until your order comes in?

On your question there, I'd be kind of curious to see how one of the more experienced people respond. I'm pretty new to everything but after googling the unit and tank I would think that would work just fine.. Like I said though, I'm new to everything here. There could absolutely be something I don't know about that I'm not considering...

Good Luck!

Thanks for the quick reply
Unfortunately over here in Australia we can buy tanks, mods, flavours, pg, vg, and juice without nicotine.
Selling nic liquid in Australia is illegal, cause we're a big ole ..... for big tobacco. I have to important all my juice,
and soon DIY supplies. Shipping sometimes costs twice the amount of what i'm ordering. Still cheaper than smokes though!

I thought it would work fine too ! And if there were danger of reaching max voltage or amps, you'd really think they'd include that information. It sits nice and flush, i'm so excited. Only wish my store had the burgundy or orange mods in stock
Knowing me ill get a gold mvp3 soon though. Shiny things are nice.

 

[Bonskibon]

Here are your specs. It's a regulated device and won't fire if the payload if more than the mod can handle. You should be fine.

eVic VTwo Features:

• 1 to 80W Output Range
  • 0.15 to 3.5 ohm Atomizer Resistance Range
  • Firmware Upgradeable
  • Bypass Mode
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • SS316 Support
  • Adjustable Three Memory TCR
    • Fine Tune Temperature Output
  • 200 to 600 degree Fahrenheit Range
  • 0.05 to 1.5 ohm Atomizer Resistance Range
• V4.02 Firmware Installed
  • Real Time Clock (RTC) Display Mode
    • Elegant and Useful Display Mode
    • Vertical Stack of Analog Clock or Digital Clock
    • Output Readout
    • Atomizer Resistance
    • Battery Life Indicator
  • Clock Screen Protection
  • Custom Logo
  • 5000 mAh Built In Battery
    • Micro USB Charged
• 0.96 inch OLED Screen
  • Vertical Arrangement
  • Output Temperature
  • Output Wattage
  • Output Voltage
  • Material and Mode Selection
  • Atomizer Resistance
  • Output Current
  • Battery Life Indicator
  • Stealth Capability
  • Rotating Screen
  • Adjustment Lock
• Swivel Adjustment Knob
  • Quickly Adjust with One Hand
• Stainless Steel 510 Threadpoint
  • Square 24K Gold Plated 510 Connection

 

[gotch23]

Nah, you're fine with the device you got.
Actually mods with built-in battery are safer, especially if you're a rookie.

 

[mattmc92]

Here are your specs. It's a regulated device and won't fire if the payload if more than the mod can handle. You should be fine.

eVic VTwo Features:

• 1 to 80W Output Range
  • 0.15 to 3.5 ohm Atomizer Resistance Range
  • Firmware Upgradeable
  • Bypass Mode
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • SS316 Support
  • Adjustable Three Memory TCR
    • Fine Tune Temperature Output
  • 200 to 600 degree Fahrenheit Range
  • 0.05 to 1.5 ohm Atomizer Resistance Range
• V4.02 Firmware Installed
  • Real Time Clock (RTC) Display Mode
    • Elegant and Useful Display Mode
    • Vertical Stack of Analog Clock or Digital Clock
    • Output Readout
    • Atomizer Resistance
    • Battery Life Indicator
  • Clock Screen Protection
  • Custom Logo
  • 5000 mAh Built In Battery
    • Micro USB Charged
• 0.96 inch OLED Screen
  • Vertical Arrangement
  • Output Temperature
  • Output Wattage
  • Output Voltage
  • Material and Mode Selection
  • Atomizer Resistance
  • Output Current
  • Battery Life Indicator
  • Stealth Capability
  • Rotating Screen
  • Adjustment Lock
• Swivel Adjustment Knob
  • Quickly Adjust with One Hand
• Stainless Steel 510 Threadpoint
  • Square 24K Gold Plated 510 Connection

thanks i see this in my manual. i was just wondering why some manufacturors decide to include max voltage and ampage capabilities where as some do not? not that it's super relevant.

 

[mattmc92]

Nah, you're fine with the device you got.
Actually mods with built-in battery are safer, especially if you're a rookie.

cool that's what i thought ! better to ask and recieve help then go off thinking i know what's best when my experience is very limited. i hope to become knowledgeable enough that i can help contribute here one day. everyone has been so kind

 

[Bonskibon]

thanks i see this in my manual. i was just wondering why some manufacturors decide to include max voltage and ampage capabilities where as some do not? not that it's super relevant.

Ah, ok, I see what your saying. Still because your device is regulated you should be just fine. I have never seen amperage capabilities in regulated mod manuals, or at least the ones I have. Guess they feel they don't need to mention it.

 

[mattmc92]

Ah, ok, I see what your saying. Still because your device is regulated you should be just fine. I have never seen amperage capabilities in regulated mod manuals, or at least the ones I have. Guess they feel they don't need to mention it.

3 that i have owned haven't said either, but noticed the coolfire iv mentions both.
just seems like they should, for transparency. i get it doesn't make a difference and they're not going to say
you can fire it at 80w with your 0.15 temp control if you can't, but i'm a stickler for the facts!

 

[mattmc92]

probably looking into getting another mod soon. cant have too many i say !
any ideas on a regulated internal battery mod that looks good? decent battery life for the day at 30-50w too.
they're all so basic, plain colours, little customizing potential if any. i like bright colours and patterns and stuff. where's those at?

 

[daviedog]

In a regulated mod, the battery can't"see" the atty. You said .5ohm? Real question, are you up to subohming 18mg/ml?..

 

[gotch23]

Well... they come in all shapes and sizes almost.
And tastes are subjective. Have a look around...

I like the styling of the Tesla Nano 60W TC
Tesla Nano 60W TC Mod $34.99
Performs well also.

For patterns and colours and stuff i'd recommend a mod-wrap, from j-wraps eg.

 

[BrotherBob]

All I have is my 18mg tobacco flavoured liquid for my mtl in my melo3.
I have this new toy, and I can't even use it for maybe another week ! The excitement is killing me !

Could cut your liquid down to 4.5mg. or less. You would be vaping near flavorless liquid thought.
(Halving 10ml of 18mg = 20ml of 9.5 mg. '''etc./ could use 50/50 or whatever PG/VG).

point of query: another vaper on this forum suggested it's imperitive to get a mod with an external 30amp battery if i'm to be using the crown. is this really neccesary? i feel like at 50w, 5V, my new internal battery device should be more than capable of firing 10amp and above (although it's not actually specified anywhere what its max volt & amp capabilities are).

No need to get an external. Not sure of your manufactures chemistry (LiPo ?), but an internal may be more safer than an external and last longer over the long run not to mention may help deliver a better vape.

 

[mattmc92]

Could cut your liquid down to 4.5mg. or less. You would be vaping near flavorless liquid thought.
(Halving 10ml of 18mg = 20ml of 9.5 mg. '''etc./ could use 50/50 or whatever PG/VG).

No need to get an external. Not sure of your manufactures chemistry (LiPo ?), but an internal may be more safer than an external and last longer over the long run not to mention may help deliver a better vape.

Could I just go 10ml of 18mg.
3ml of flavouring. Then 17ml of vg/pg to get 6ml without sacrificing too much flavour?

 

[BrotherBob]

Could I just go 10ml of 18mg.
3ml of flavouring. Then 17ml of vg/pg to get 6ml without sacrificing too much flavour?

You will have to experiment. Some folks vape flavorless PG/VG and just add as little as 1/2 % of flavor or no flavor. It might be a good idea to take notes on whatever you do so you will have a record of it.