New Take on Cartrige MODS

[webking]

I do not have full access as of yet so I am posting my take on several Cartridge MODS combined to create a new version.

I basically took a 510 Cartridge, remove all the filler.

Now the next step was taken from another mod. I took the condom that came with the catridge on the battery side and cut it down so it fit into the cartridge. The same idea for the drip cartridge mod that many had problems with. Once it fit snuggly I slice a star pattern into it, I than made a small hole in the center. This way the juice could drip more easily through it.

The final step was to cut a small amount of the fluval I removed, I than stuff it into the cartidge so it sat on top of the plastic plug I made above.

Now there are 2 ways to fill the cartridge. One way is too remove the fluval and plug you ade and fill the cartridge or you can leave it in and remove the cap and inner cap and fill unto you see the liquid.

I was skeptical, but so far it seems to work great.

I don't really experiment, but I had to try it.

I am using this MOD on a V3.1 with 510 atomizer and Bobas Bounty. Since I am using Bobas Bounty its hard to tell how much the vapor improved. Since Bobas Bounty generates a lot of vapor to begin with.

 

[B-Rad_The_Mad_Vapr]

There was a mod in the modders thread a while backwhere a guy did this with the cart condom and he had cut a straw down to keep the condom piece from falling in, although he didn't reuse any fluval.

 

[webking]

No straw involved. Just the plug and a small amount of filler. It basically creates a sort of wetbox.

By no means am I saying I created this MOD, its my take on several mods. It may be an existing MOD, but so far I have not seen it.

 

[Mr.Self_Destruct]

what holds your ZFM in? I can't see the blue foam being able to support it, especially after it is used a few times and gets soft.

 

[webking]

You need to cut a plug out from the condom. You than need to puncture the plug with a small hole of with slits. Than push it into the cartridge. Than take a small amount of fluval and push that in on top of the plug. The plug is what holds the juice and drips it onto the fluval and than onto the atomizer.

 

[webking]

Its not totally ZFM, but close to it.

 

[Mr.Self_Destruct]

You need to cut a plug out from the condom. You than need to puncture the plug with a small hole of with slits. Than push it into the cartridge. Than take a small amount of fluval and push that in on top of the plug. The plug is what holds the juice and drips it onto the fluval and than onto the atomizer.

I've made ZFM's before, so I know "how to". I just wasn't sure how yours was staying in place. Some people Glue them and some use straws. I didn't realize you put the ZFM in and the a fluval plug on top.

 

[webking]

I have tried the LTB, ZFM and a few others and decided experimenting was not for me. I prefer quick and easy. But the idea seemed easy and did not require much work or materials.