New to E-cigs

Status
Not open for further replies.

dormouse

ECF Guru
ECF Veteran
Oct 31, 2010
12,347
1,611
Pennsylvania
Vaporkings.com (no relation for Vapor4Life's VaporKing which is a KR808D-1)... Vaporkings.com now has blank KR808D-2 cartos (and E9 is KR808D-2). First vendor I've seen with blank cartos for KR808D-2
KR808D-2 or GreenSmoke compatible blank cartomizer - package of five

And don't every pay outrageous prices for E9/KR808D-2 parts. Some of those "name" vendors of D2's are real ripoffs on parts. AZSmokeFree.com has KR808D-2 parts including entire 2 battery kits for less than what some ripoff rebranders charge for one battery. Note - occasionally you might see something say Bloog cartos are KR808D-2/E9 but they are not - that was the old Bloog model. The current model is KR808D-1 (more popular but thread-incompatible w/ D2)

LeCig sells D1 <> D2 adapters. Their D1 is actually some kind of 901 (air channels not exactly the same as KR808D-1) but the adapters should work for using E9/D2 stuff on KR808D-1 and vice versa.
 

dormouse

ECF Guru
ECF Veteran
Oct 31, 2010
12,347
1,611
Pennsylvania
Yes Mickeyrat - that works perfectly for people who are near power most of the time. And standard size KR8 D2 and D1 batteries are 280mah, not 90 or 180 like smaller slim ecigs. The KR8 D1 and D2 are also 3.7 volts devices. I don't take well to contests over battery size and voltage. You have a big battery. I am happy for you. Everybody has different needs.

Re E9 - one downside is no manual batteries. Manual KR808D-1 batteries aren't sealed on the end but at least they aren't dependent on a drag sensor in there. Once you start filling and refilling cartos, there is a definite chance you will end up killing one or more of your auto batteries because no matter how careful you are with refilling, occasionally a carto is going to drip out that bottom hole, right where your drag sensor is. Auto batteries can also turn on accidentally sometimes from wind or vibration. And they are more work in my opinion.
 
Status
Not open for further replies.

Users who are viewing this thread