New to vaping, but I'm very interested in DRIPPING

Status
Not open for further replies.

Spencer87

Ultra Member
ECF Veteran
Verified Member
May 24, 2014
2,444
1,298
Jakarta- Indonesia
Dripping.
You need A rebuildable Dripping atomizer. and Kanthal or some other resistance wire.
And then you make coils, and stick them inside the post holes of the atomizer which is screwed on to a mod, (Not a vape pen, a full size mod)
Check it with an ohms meter,
make sure the reistance of the coils is not going to draw an amp level over the CDR of your batteries (You previously have ensured that you have good batteries and a good charger...)
After wicked and making sure you are in the safety limits... you will drip e juice directly on the coils...

Here you go.
Read number 7
Then number 9 onward. That should give you a basic understanding
But as a newbie, I would give it a few weeks before trying to get right in to it. If you have a vape shop around you, go in and ask them to show you the ropes a bit
 
  • Like
Reactions: Wolfenstark

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,077
71
Ridgeway, Ohio
Spencer gave great info for a rebuildable drip atomizer, but you don't HAVE to build coils to enjoy dripping.

There are some old school juice attachments called "510 drip atomizers" which are disposable, factory-made juice attachments that you can use to inexpensively experience the art of dripping. These can be found starting at $7 for the cheapest.

atomizer-3_zpsb9f3eb17.jpg
510 drip atomizer

Please read the info available on the 510 drip atomizer in this guide:

Getting into the "rebuildables" like Spencer was describing is a lot more complex and will require some research on your part. Here is a guide with most of the info you'd need.

 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread