Hey guys, so i just got my new vamo v2 and im curious about one thing, i dont have any idea what RMS is but i see that its the best setting to be at, my cartomizer is a 3.1 ohm as my Vamo tells me, so in rms mode what should i do, use voltage mode or wattage mode, and if i should go wattage, what should i set it at, i have no idea of how wattage works
- Status
Here's a very handy chart:
https://store-549f5.mybigcommerce.com/product_images/uploaded_images/voltagechart-lg.jpg
https://store-549f5.mybigcommerce.com/product_images/uploaded_images/voltagechart-lg.jpg
I was never interested in variable wattage. I picked up a VAMO as an inexpensive VV mod, and quickly realized that I prefer VW over VV. Give it a shot, you might just like it!
i wanna learn more about wattage in that chart it says for a 3.1 ohm go to 6.25 watts for optimal vape but it seems pretty tasteless in my opinion, am i reading the chart correctly?
\what would u guys do with the numers i gave u
3.1ohm carto in a tank
RMS setting on the vamo, what wattage would u recommend
\what would u guys do with the numers i gave u
3.1ohm carto in a tank
RMS setting on the vamo, what wattage would u recommend
I hope this shows up right (I have never done this before, this is a quote from another thread). I do not have a Vamo, but I have read this suggestion a few times. Maybe it's helpful???
Linked Below is a pretty complete and video that should answer your questions about the Vamo and it's functions, it's kinda long but some good info in it. In short RMS is the more accurate setting of the two and once you set it in RMS mod you don't have to bother with that again.
As far as where to set it, preference has alot to do with that but many find their sweet spot in the 7 to 8 watt range. I'd suggest going low and work your way up till you find what works for you. If you're in VV mode then 7 watts on a 3.1 atty would be right at 4.7v so that would probably be a good starting point, you'll probably work your way up a little from there....or maybbe not, it's preference.
A PBusardo Review - The Vamo - YouTube!
Also, here's a ohms law calculator you can play with that will show you how volts relates to watts but if you can adjust the wattage...which you can, you'll probably find that easier than adjusting voltage anyway, plus it'll be consistent between attys and cartos in wattage mode.
Ohm's Law Calculator
As far as where to set it, preference has alot to do with that but many find their sweet spot in the 7 to 8 watt range. I'd suggest going low and work your way up till you find what works for you. If you're in VV mode then 7 watts on a 3.1 atty would be right at 4.7v so that would probably be a good starting point, you'll probably work your way up a little from there....or maybbe not, it's preference.
A PBusardo Review - The Vamo - YouTube!
Also, here's a ohms law calculator you can play with that will show you how volts relates to watts but if you can adjust the wattage...which you can, you'll probably find that easier than adjusting voltage anyway, plus it'll be consistent between attys and cartos in wattage mode.
Ohm's Law Calculator
thanks but im mostly curious as to how wattage works in rms i know i dont have to worry about voltage because the device regulates that and gives u the best voltage output when in watts mode and in rms, but i just want to learn a bit more as to wattage cause i have no idea whats a good wattage number to use with the 3.1 ohm carto
Personally, I have no interest in scouring that chart. I start low (be it wattage or voltage) and very SLOWLY work my way up. Eventually, you'll get a good vapor/TH, and then when you go a bit higher, it will start to taste burnt.
Screw the chart, experiment and find what works for you.
Screw the chart, experiment and find what works for you.
am i correct when people say if u put it in rms mode, then go to VW mode i dont have to worry about the volts cause the vamo will automatically set the volts ? or do i have to set the wattage and the voltage?
You set wattage OR voltage.
the ohm of your carto makes no difference either.
If you're vaping at 8 watts, it will adjust your voltage to reach 8 watts with whatever ohm carto you're using.
Don't worry about voltage or ohms anymore. Find your wattage sweet spot and forget about everything else.
the ohm of your carto makes no difference either.
If you're vaping at 8 watts, it will adjust your voltage to reach 8 watts with whatever ohm carto you're using.
Don't worry about voltage or ohms anymore. Find your wattage sweet spot and forget about everything else.
You cannot set the volts and wattage. They are a function of one another. In either mode, you set ONLY volts or watts.
Like has been said, the ohms of your carto doesn't matter in vw mode. A 1.5 ohm and a 3.1 ohm cartos will give the same results if set to 8 watts. The VAMO adjusts the voltage to the correct amount based on what it reads as the resistance of your carto. I suggest starting at 6 watts and goind up .5 at a time until it's what you like.
Sent from my LGL55C using Tapatalk 2
not to sound redundant but I use mine at 7-8 watts regardless of the ohms of the coil...seems the sweet spot for Bobas in a Vivi Nova....when I change to a nova with a 50/50 i back it down to 7...and its good to go....ALOT easier to do than try to chase the ohms and adjust the volts....singed a few 1.8 Nova coils doing that...so I have learned that VW is the way to go
- Status
