Is it a glass tank pyrex or what I am looking to buy once and buy right a tank and a 5 pack of atomizers and some kanthal and wick should last me a year yes/no??
If you want to want to have something solid you can use any juice in, and do easy rebuilds, IMO you can't do much better than the kanger evod/protank/T3s/MT3s style clearomizers. Pbusardo from tasteyourjuice.com has a good video tutorial on how to rebuild those coils, as well as reviews/overviews of them. Evod = polycarbonate, protank = Pyrex, T3s/MT3s = polycarbonate. Polycarbonate can break down with citric/cinnamon tank cracking types of juices (there is a list on ECF that has a bunch of them listed by name and/or types). Polypropylene plastics are considered mostly safe (save the ultra potent juices) and Pyrex should be a-ok for all.
As far as wick and wire, you can buy from many vendors (many online stores have silica wicking materials, ekowool also, and either nichrome or kanthal). I personally use The Vape Mesh Company. Lots of others use Temco Industrial for wire. Others swear by some dude on amazon. If you can afford to buy a few different types/sizes of wick and wire, get like 34/32/30 awg kanthal A1, and some different sized wick like 1mm, 1.5, 2 and 2.5. Don't buy too much of any one kind (but get enough to tinker with for a week or two, like up to 10ft of wire, a few feet of wick), learn and build up your knowledge and skill, THEN buy in bulk what you are happy with. Wouldn't hurt to have a few extra 5 packs of evod bottom coil clearo heads. You will need some thru a whole year, but much less if you rebuild instead of throwing them away.
Also, buy a digital multimeter, and learn how to check resistance/ohms with it. Don't just blindly build a new wick/coil and not test it, you'll cause an accident. Many good posts/blogs on this site about rebuilding and tips/tricks, some even specific to evod's. Always check your resistances before you attach and fire a newly wrapped coil!
When in doubt, re-read and re-watch, THEN if you still have questions and/or concerns, pop back in and ask questions!! Everyone here (minus a few trolls lurking in the weeds) will normally go out of their way to help advise folks!
Hope that helps you out!