Nickel GGTS

[blackwater]

What is the best and easiest way to clean my mod? Mine looks gun metal grey right now. It's only been 4 days. Hahaha!!

Thanks,

Chris

 

[classwife]

I have a nickle plated PV that came with "Cape Cod Metal Polishing Cloths" from Cape Cod Polish Company, Inc. Fast and easy to use...

 

[Bigbuyer]

I use a polish called Flitz. Works great!

You can order it online...just google it.

 

[blackwater]

Just tried out the cape cod and didn't see a huge difference. Lots of rubbing not a lot of improvement. Some but still looks like ... and needs to be cleaned.

 

[eyebrook]

I use baking powder, mix it to a paste and rub it on , very fine paste jewellers use it to polish silver, hope this helps
PS takes a bit of work though

 

[silentt]

I use nothing but gasoline, works great.. takes the nickel right off of that bad boy.

Just kidding!!! I use this Mothers Polish and it worked great. I did try some Cape cods cloths but I heard they are very abrasive and I didn't want the nickel to actually start coming off. Most of the time I had my Nickel ggts I just wrapped it up in a microfiber cloth so my hands never made contact. Keep it very clean so you don't have to polish that much and it will last a lot longer. If you want to do some research try to find a polish that is the least abrasive as possible so you won't wipe away all the meterial(nickel).

 

[Wylie]

There are a few comments over here:

http://www.e-cigarette-forum.com/forum/gg/198452-polishing-nickel-plated-ggts.html

 

[Dream]

I use a polish called Flitz. Works great!

You can order it online...just google it.

Should I use the Flitz paste or liquid on a nickel GGTS?

 

[Bigbuyer]

I use the liquid. Works great.

 

[dspin]

The liquids always have less abrasives than the paste, whichever brand you choose.