Nicotine needs

[Rosco P. Coltrane]

Not too long ago i was at 24 mg nic. Slowly Dropped to 12 when i started upgrading my devices.

Got the Reo and was warned that i will need to drop my nic. You were all right on that one. What surprised me is just how much i needed to drop. I went from 12 down to 6 mg liquid the first day with the Reo. Other devices still had 12mg and I quickly found the TH to be too much. Odd since prior to using a Reo i felt 12mg did not quite provide enough TH.

One week into using the REO and now I have to cut my 6mg liquid with strait no nic VG. I am guessing i am somewhere around 4 mg, and even at this level i cannot chain vape the Reo (as much as I want too, damn this device's awesomeness!).

I had no intention of dropping my Nic level, every drop I have done was because I HAD too in order to not be put in a nic comma.

so now i guess its DIY juice time. money saved will go towards another Reo. And to those who said "just order two" correctomundo again!

 

[STLJohnny]

Roscoe Pico Trane speaks the truth

 

[Wickeddeuce]

im right there with you... if you could only have seen my first day with the mini... popped my 50/50 10 nic homemade diy into it... take a vape... look at my wife, who has taken over the diy mixing because she is just so freaking awesome at it... hunny im gonna need some 30/70 and probably some 5 nic... vape... tonight please if you can hunny... vape... some time goes by... she comes to me wanting a kanger coil rebuilt... ok hunny but only if you mix tonight...

lovin the reo mini, it has aptly been named my Precious... got the 30/70 5 nic, increased the hole to 1/16th and am in absolute bliss right now...

 

[Stringer63]

5 nic diy for me on the grand/rm2 with 1/16 air hole - hits the spot like a frickin champ.

 

[marsos52]

I to have learned at the lower ohm coils and a better than average mod and atty I need to lower my nico level.
with single coils at .8 I at 6mg of nico with a 40% pg and 60% vg mix.

If I use a dual coil setup, this changes my nico level to 3mg. The better the mod hits the less nicotine is needed.

 

[Rosco P. Coltrane]

Funny part is over in GD i've been going back and forth with people who think sub ohm vaping is a dinosaur who's time has passed.

I got a .8 micro coil setup going in the Reo/RM2 and it's an insanely good vape...a short drag, similar to the drag length of an analog and i have a very satisfying hit.

Considering looking for a buyer for a Provari mini that is less than a month old...

 

[mackman]

I hear you. I run .7 micro coils on the RM2 and the Igo-s on a Grand and a Mini 2.1 with absolutely no problems with sparking or melting. I too had to drop to 6 nic or get a overload. On a Provari/Kayfun I can vape all day at 12mg.

 

[karmakatie]

I started at 24mg and took it down to 18 after finding the Reo, now down to 12mg with the addtion of the RM2's. I am definately at a happy place now!

 

[ltrainer]

24 mg for over 3 years...lately at 1.1 ohm.

 

[thinkingaboutit]

I am at about 9mg/ml nic. Depends on if I cut it more, and how much flavor is in it, etc.

I won't nedd to buy any more nic base for a long, long time.

 

[txgtr]

My ADV is 6mg Boba's Bounty. As of late I've been cutting it 50% with 50/50 pg/vg no nic base. This of course brings me down to 3mg nic. I'm completely satisfied with this and I honestly don't feel that the flavor is decreased at all. I actually like it better. My wicks last longer and I still get awesome vapor production.

I'm running dual micro coils that come out to just under 1 ohm. Usually .7 to .9. I can chain vape without any ill effects. I've also found that I will sometimes set the Reo down for a period of time and almost forget about it. I still love my Reo and I still love vaping, but I don't feel nearly as dependent on it as I once did.