noob with a couple questions

[Txhd01]

I don't think keeping it charged would be too much of an issue since I spend 12 to 14 hours a day in a truck mainly just looking for a very good quality setup. Also something I can throw in my pocket when I hop out of the truck and not worry about breaking it. Would I need to remove the tank on most of these when I do put it in my pocket? Also any other setups anyone would suggest? looking to not really go over 100.00 us dollars on the setup. Now juice is a different story lol I see some cash going out playing with all the flavors they have out there.

If you like the box mods then spend a little more and go with a VTR, another Innokin product. I have a VTR, MVP V2, and a SVD...the VTR is by far my favorite. When you say "pocket" are you talking shirt or pants?? The VTR would be too heavy for a shirt pocket. Some people see the weight as a bad thing, me personally I like a heavier mod. The way the VTR is set up just about any 19mm tank fits on the side not the top like most, making it shorter and more pants pocket friendly. Plus the tank is somewhat protected by the VTR's design, it would be almost impossible to snap the tank off. It's going to be a little over the price range you want to spend after you buy a battery(s) and a charger. The up side is that when the battery finally quits you replace the battery only($15) and not the whole mod like the VV or MVP. Hope this helps and good luck on finding what suits YOU the best.

Keep Calm and Vape On

 

[mjohnsoniii]

I'm another new vaperer looking for a decent setup. I don't necessarily like the box type but it's always an option. I have this type...



but I want something more...I dunno, quality. I picked it up from a gas station on a road trip because I had kids in the car and didn't want to kill them with second hand smoke. I fell in love with it but buying ANYTHING on a whim from a gas station means there are way better quality items out there alike in nature. Any suggestions on a "similar" setup?

 

[edyle]

I'm another new vaperer looking for a decent setup. I don't necessarily like the box type but it's always an option. I have this type...

View attachment 310685

but I want something more...I dunno, quality. I picked it up from a gas station on a road trip because I had kids in the car and didn't want to kill them with second hand smoke. I fell in love with it but buying ANYTHING on a whim from a gas station means there are way better quality items out there alike in nature. Any suggestions on a "similar" setup?

miniprotank2 on an itaste vv v3

 

[Buggainok]

I'm another new vaperer looking for a decent setup. I don't necessarily like the box type but it's always an option. I have this type...

View attachment 310685

but I want something more...I dunno, quality. I picked it up from a gas station on a road trip because I had kids in the car and didn't want to kill them with second hand smoke. I fell in love with it but buying ANYTHING on a whim from a gas station means there are way better quality items out there alike in nature. Any suggestions on a "similar" setup?

If you want something like you have but better quality, here is a Kanger ego starter kit for a good price from a reliable vendor. It comes with 2 batteries, 2 toppers and a charger. Everything you need but juice. If you enter the code ECF at checkout, it's about $30, with free shipping:

Kanger EVOD eGo Full Kit - Vaping Me

 

[The Vaping Trucker]

Just an update..

I ended up getting the Innokin Itaste MVP2 for myself and one for the wife as well
Also got some new juices to go with it from Moon Mountain Vapor and so far loving this setup and the juices just placed a sampler 10 pack order with them as well to try some more flavors

Any suggestions on some better tanks than the iclears that came with the MVP2?

 

[Jasman]

I have the same one and here to find a better one myself. I'm thinking VV & VW. Good Luck !

 

[Jasman]

SRY same as mjohnsoniii.

 

[jboostc]

id honestly go with a tank.
protanks are hit or miss. just have to get that one perfect one lol. ive had great success with an ismoka bcc
but i mean in all honesty its really what you prefer. check out your local shops selection of tanks and im sure theyll point you in the right direction

 

[FeuerEngel]

id honestly go with a tank.
protanks are hit or miss. just have to get that one perfect one lol. ive had great success with an ismoka bcc
but i mean in all honesty its really what you prefer. check out your local shops selection of tanks and im sure theyll point you in the right direction

I have a simple Vision Spinner 1300mah with a Kanger Protank 3. At first I was extremely upset with the PT3. it would either flood constantly, or I would get dry hits.

I did, however find a fix that so far has worked. I used a push pin to slightly increase the size of the holes on the sides of the threaded post, just insert pin and twist a little. then with my coil, I remove the rubber and the shaft and insert an extra wick on top of the top coil, really easy to do!! since making these adjustments, I am able to vape ALL the juice without issue, it tastes better, and has not flooded yet!!!

I agree with talking to your vape shop, All the shops in my area are more than happy to answer/assist with any question or issue you have.(they hear it all from customers) That's where I got the ideas for fixing my PT3.

 

[TylerWalter20]

I started with the volcano inferno over a year ago. No dissapointment, great american company. 900 mah battery will last me about half a day. So i bought a second one to last a whole day. Sadly these do not have a vv/vw. V/W is deff something to get because this will help you find the exact hit, amount of vapor and flavor out of your mod. Im a fan of the earlier Kanger Tech mods. As i have read many problems about there newer mods much as the pro tank 2 and 3. Aswell as the mini´s