Normal 901s in an AFSv2

[PlanetScribbles]

Is the air hole big enough by default?

 

[mwa102464]

Yes, however all Atty's are a bit different even the same exact make Attys can vary, if you find the 901's you have are not working you can try to open the hole up a little bit, but they should work as is. If ya need any other help just PM me and I will help you any way I can.!

 

[PlanetScribbles]

Thanks man

 

[vapn]

Every atty is different. The draw has everything to do with how it will work in the AFS. If the draw is very light then it IS going to flood easily. If the draw is a little tight it is going to work nicely whatever the hole size. All you can do is give it a go and see for yourself. This is all trial and error....

 

[PlanetScribbles]

It seems that my 3.7v attys are flooding everytime

 

[HoPeFuLLL]

Give 6.4V a go, 2x17340 batts, wonderful.

 

[arry]

It seems that my 3.7v attys are flooding everytime

You need to hole in the atty in the up position (no fluid covering it ) if floods , normally clears , if becomes too dry you need to position the hole in the fluid .
I find cartos are much better ..

 

[PlanetScribbles]

I've not tried cartos in the afs yet, and 901s have the hole already drilled. It's not a big hole, so why does it flood?

 

[VaporKings_Michelle]

I've not tried cartos in the afs yet, and 901s have the hole already drilled. It's not a big hole, so why does it flood?

Could be your e-liquid your using is too thin.

 

[arry]

I've not tried cartos in the afs yet, and 901s have the hole already drilled. It's not a big hole, so why does it flood?

When you fill chamber up with juice , unless you plugg off the top of the atty , because the pressure from the juice is greater than the air in the atty it will flood .
And will take you about 30 puffs with the hole point upward out of juice (imeo quote) to burn off.

This is what i do but i use cartos and takes about 1 puff to burn off any flooding everytime i take the top off to fill
see - http://www.e-cigarette-forum.com/forum/gg/110305-afsv2-trick-tip-try-when-refilling.html

Its also a real help and a hell of alot easier if you can see the hole and juice its comming

 

[vapn]

I find that when I put my caps back on I always put the big one on first and then the oring and then the small cap very slowly. I still get flooding but very little. Every one has their own little tricks and what ever works for you is best.

 

[imeothanasis]

The best trick is:

unscrew a little the small cap
screw slowly the big one
screw the small one

 

[vapn]

I'll try that next time thanks