**official canvape.com thread**
- Thread starter mopar
- Start date
- th_trl_thread_readers 0
- Status
I use a pair of tweasers (how the hell do you spell tweasers?) with kind of thin flat grippy ends to remove and replace the cup seal, works real good for me.
Best/easiest way i found to clean them is in PGA(Think EverClear or Alcool at 94%) in an ultrasonic denture or jewelry cleaner. Jugheads.co sells some pretty cheap ones in a cleaning kit of his under his Modders section. The alcohol will dilute any gunk stuck on the coil and clean out the wicks a bit. To thoroughly clean the wicks though, take a paper clip, unfold it and make a tiny tiny bend on the end small enough to enter one of the filling holes in the end. Hook the wicks and pull them out the end. While still wet with the PGA, pinch them in you fingers to try and remove any excess you can and let them air dry a bit ... being high % alcohol, it doesnt take too long to evaporate. After a bit, stuff the wicks back in and hook it up to a battery. Dry burn a few times to dry out the coil inside and you're set to fill her up.
Reason i use PGA instead of hot water is simple. Water contains minerals. Specially Hot water as it's been sitting in your hot water tank for a while. These minerals will corrode and rust your heating coil and the wire for the LED. You can always use Distilled water, but i find PGA is easier to come by, plus ... you can have a shot or two whenever you're thirsty
Some ppl might contest the rusting coil theory, but i have ruined many of my Clearos due to this 1st hand. My clear juices turn orangish and just dont taste right.
No need to disassemble anything this way. The top stays in the tube, and everything stays in one piece. Just pop the whole bloody clearo right in the ultrasonic cleaner.
Last edited:
Just got a new toy from our friends at canvape
eGo LCD 1100mAh Battery V2 Black or Stainless in brushed stainless
coupled with:Extreme Vizzions Cone in brushed stainless
and topped off with: Extreme Vision Blue LED 3.5ml Mega Long Life Clearomizer
Dude...I like little lights and gizmos,I consider myself served!
Its actually a bit less than 1 inch longer than a KSD VV (8inches end-to-end) with the same setup but looks so classy!
Me likes a lot!
Too early to talk about battery perfs,but 1100mah should do the trick no problemo.
What it looks like (I need a better cam!):
eGo LCD 1100mAh Battery V2 Black or Stainless in brushed stainless
coupled with:Extreme Vizzions Cone in brushed stainless
and topped off with: Extreme Vision Blue LED 3.5ml Mega Long Life Clearomizer
Dude...I like little lights and gizmos,I consider myself served!
Its actually a bit less than 1 inch longer than a KSD VV (8inches end-to-end) with the same setup but looks so classy!
Me likes a lot!
Too early to talk about battery perfs,but 1100mah should do the trick no problemo.
What it looks like (I need a better cam!):
Nice! Keep us posted on your experience with these. Have a couple on the way myself ...
Been sucking on it on/of for 5 hrs,still 4 bars (full) showing with just a quick 2hrs initial charge...lookin good!
Showing 137 puffs
Showing 137 puffs
Oops - meant the Visions, not the battery. Nice to know about that, too, though.
The visions are awesome,no regrets
I only use them with juice that I will refill and refill and refill...
I only use them with juice that I will refill and refill and refill...
The visions are amazing. Even if you fill it with a juice and turn out not to like it to much just dump it out and then refill and start vaping.
The old flavour will be around for maybe about 10 puffs or so and then the new juice will start to take over
The old flavour will be around for maybe about 10 puffs or so and then the new juice will start to take over
Umm if anyone is questioning the best quality Kanger 808d stuff all Kanger hardware now has full one year warranty don't buy the hype from others. Also we are working on a 2nd variable voltage mod but won't be for a couple months.
More of everything on the way +++ I am relentlessly hacking at the manufacturers to ensure our goods arrive before the big 2 week holiday coming up. We have bottomed out on CE2's CE3's I think the people that know how to use/fill them really like them because I thought we had enough supply for a 1/2 year and it's all gone I had to put the cartomizer kit on hold because of the Ce2 and Ce3 shortage when they come in we will be changing it up to add an X7 a couple other carto's and drop the eGo case. We also have the stardust on order so hang tight kids everything available anywhere will be able to be picked up at canvape.com at the fairest prices around
More of everything on the way +++ I am relentlessly hacking at the manufacturers to ensure our goods arrive before the big 2 week holiday coming up. We have bottomed out on CE2's CE3's I think the people that know how to use/fill them really like them because I thought we had enough supply for a 1/2 year and it's all gone I had to put the cartomizer kit on hold because of the Ce2 and Ce3 shortage
when they come in we will be changing it up to add an X7 a couple other carto's and drop the eGo case. We also have the stardust on order so hang tight kids everything available anywhere will be able to be picked up at canvape.com at the fairest prices around
Last edited:
BTW Mopar,that 1100mah battery I got today...quick 2 hrs charge,325 puffs later...3 bars showing,solid
Ohhh new goodies! Thanks mopar!
Great to see my favorite Canadian vendor carrying things rather rapidly.
Great to see my favorite Canadian vendor carrying things rather rapidly.
BTW Mopar,that 1100mah battery I got today...quick 2 hrs charge,325 puffs later...3 bars showing,solid
View attachment 70773
Holy christ, that thing is long. Longer than the eGo VV, and that's the longest eGo I have!
So sent. Nice to match our nicks with the real names we get on our site.
Your pictures are better then the ones on our site!! Haha
Just got my second DCT tank from canvape, filled it up with Smurph Piss and am loving it. I find i get a better vape by using a screw or nail and punching the hole in the carto a little bigger.....I have 5 of the giant vision clearos, 3 of them had LED's but they burn out pretty quick, i would say withing a couple weeks or so, so if you are bothered by them they probably wont last long
EDIT: I forgot the reason that i posted
You know all you have to do is ask mac
we have blue and silver usually just grab a different colour every other order.Haha next vape meet I'm gonna show up with all my crusty carto's and put you to work bro haha
Just grab a standby and come to the next vape meet we are going to trade rye and cokes for carto cleaning to Zeroith
The V2 1100mAh eGo batteries are fantastic. The first ones I wan't that impressed with they were pretty but didn't like LR stuff and just didn't deliver/hit my expectations. The V2's are possibly the best eGo bat I have had the pleasure of using(other then the VV eGo) we have awarded them with almost all of our battery orders and they mean business. The LCD eGo batteries come with a full 1 year warranty!!!!!! From the manufacturer. The Kanger warranty we give is 100% from us but it has been without a doubt one of the highest quality products we have had the joy of supplying to people. Also within the next few weeks all of our atomizers will be coming exclusively from our supplier that does our bridgeless and HV atty's so anyone that has tried those know that these guys make seriously great atty's.
I think this is why everyone like to post in the members section about canvape. They can avoid our propaganda, but as all our customers know we are genuine and will not allow anyone to have an unsatisfactory experience.
Haha next vape meet I'm gonna show up with all my crusty carto's and put you to work bro haha
Just grab a standby and come to the next vape meet we are going to trade rye and cokes for carto cleaning to Zeroith
Just hope that the weather is good and I will be there with my supplies... I wonder if the Honest Lawyer can supply me with PGA
- Status
Similar threads
- Locked
- Locked
