**official canvape.com thread**

Status
Not open for further replies.

pherse

Senior Member
ECF Veteran
Verified Member
Nov 6, 2011
131
82
Belmont, Ontario
There is a difference between talking smack and dedicating your life to destroy something someone is trying to build. Latest example where I am happy to "share" with you not run and tattle about.

URGENT - Digital Millennium Copyright Act (DMCA) Notice -www.canvape.com

WOW, Someone needs to lay off the glue.:blink:
 

northofamerica

Super Member
ECF Veteran
Verified Member
Feb 5, 2012
452
207
Saskatoon
I need some input!

I finally decided on the LT KIT.

I'm wondering what cartos and tanks I should get to try out?

:vapor:
In 3 1/2 week's I have tried many things. Looking for a new mod now and I have only had the LT for a week lol! :)


This stuff should keep you going for a while and should be like 32$ for all? Add it to your cart and slowly remove if it feels like too much pressure on the bank account... if you can. Muhahahaha :) Remember this is only my opinion. You might hate all of it!
In this order I suggest...

510 Bridgeless Low Resistance Atomizer --- Better than what comes with it.... better all around.
510-eGo Adapter or 510->510 extender ---This is for the Star Dust and whatever else you might want to extend out later on. Not sure how much air restriction the ego adaptor will have on the Star Dust so the 510-510 might be a good choice for the LT.
eGo Vision Star Dust --- I suggest this highly for vv users. :)
Smoktech LR 1.5ohm Dual Coil Cartomizer 5 Pack Stainless - Might want to invest in some of these. You can get a tank later if you like them.
Boge Cartomizer 5 Pack SR - I suggest these because people like them and you might too. not too expensive to try out for 5.
Extreme Vision 3.5ML Clearomizer Mulitcolour - I like the vapor these produce but not the fiddling with it. some are awesome, some you gotta fiddle with. It's luck of the draw for me but I keep wanting more! :)

Vape big!
 
Last edited:

Cobber

Unregistered Supplier
ECF Veteran
Jul 10, 2011
640
257
Kingston Ontario
www.itsjustvapor.com
I'm in the same boat as you shiver. A few pages back someone made a few recommendations of what I should get with it, now I just have to go back through all these pages to find it :facepalm:

I would suggest getting a couple of attys ... try out dripping. It's awesome.

What ever you get make sure its a higher res.
 

jmhebert

Full Member
Verified Member
Feb 27, 2012
34
4
Lasalle, Qc
I need some input!

I finally decided on the LT KIT.

I'm wondering what cartos and tanks I should get to try out?

:vapor:

Hi Shiver,

To be able to use the full range of voltage of the Lavatube you need a 2.4ohm or higher carto or atomizer.
The max amp an LT can give is about 2.5amps. Using ohms law 2.5amp = 6.0v/2.4ohm.
With a Low Resistance Atomizer (ex 1.5ohm) you would be limited to 3.75volts (2.5amp = 3.75v / 1.5ohm).

So the LT is not really made to be use with Low Resistance Atomizer or Carto.
I have one and love it :)
 

X P3 Flight Engineer

Ultra Member
ECF Veteran
Verified Member
Feb 27, 2012
2,598
1,305
Moncton, N.B. Canada
My order arrived!!!

Same day shipping - I'm impressed!

Two days, travel halfway across Canada - I'm impressed!

Two days for Canada Post to find my parcel once it gets here - Not so much!

To top it all off, I dropped my beloved eGo passthrough yesterday and broke the button! My spares were somewhere here in Moncton, but all the Post's horses (I'm sure they must still use horses) and all the Post's men (and women) could not find them! I had to build a new button from a pencil eraser (white, of course, so the leds shine through). "If the girl's don't find you handsome, they should at least find you handy!", Red Green

004.jpg012.jpg

Happy ending? Little elves (during the night, of course) found my parcel and my eGo button is now guaranteed shatter-proof!!
 
Last edited:

wildcat

Full Member
Verified Member
Feb 2, 2012
55
12
Surrey, BC
I bought the LT & ego 1100mah LCD kit recently.

Both work great. Running the big 6ML DCT on the LT, haven't had a single leak or anything. It's very hassle free and lasts for days on a single battery / tank fill.

Also enjoying the boge and mega dual coil cartomizers on the eGo for when I am out at the pub or out for dinner. The vapor is massive on both carts. Taste is good too. I can get at least a whole day out of these batteries. :)

Overall very happy with my canvape purchase.
 

sabre66

Senior Member
ECF Veteran
Verified Member
Sep 11, 2011
97
592
vancouver bc
Just got my LT and SD's the LT feels like a POS(just my opinion don't start ragging on me) compared to my BP but I expected that, I got it so I can have VV device in my tool pouch and I don't care if it gets scratched up or dropped. These SD's are great should have bought more like 10 more. Oh ya got a few other goodies too.
 

shiver905

Full Member
Feb 8, 2012
47
47
38
Hamilton
I'm not sure what some of you are saying:

From my reading:

On the LT you cant anything that is Low Resistance-
It will automaticly use 3.7 Volts- It wont let you go higher. So from my understanding there is no point of using anything
Low Ris on a LT.

I already have a 3.7 V unit which is the 808.
----------

So, Im thinking the
1x Stardust (standard Ris)
1x Extream Vision Standard ris
1x Smoketech 2.5 Ohm Dual Coil + a tank

Or the Smoketech 2.7ohm Single Coil cartos + a tank

Any Input?
 
Last edited:

martinc

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2011
4,584
2,068
59
Montreal,Quebec,Canada
Yeah,basically the LT is suppose to have you get rid of everything else and use as main PV,so get a 2nd one (the mini!) and sell your other obsolete stufz!

Its not that the low res stuff doesnt work on it,it does work but at a lower volt range,giving you,anyways,about the same vape as a higher res atty at a higher voltage,no?
 

zer0ith

Ultra Member
ECF Veteran
Verified Member
Mar 28, 2011
2,261
2,061
42
Burlington, Ontario
Its kinda of right.

the term LR generally means something 2ohm and lower. A 2 ohm on the LT will let you get up to around 5v as the current (amp) draw is 2.5amps.

Something that is standard resistance (anything about 2.5+ ohms) will let you have a much more wide range of voltages that you can use it with allowing you to adjust the juice your using to taste
 

therealcmac

Vaping Master
ECF Veteran
Verified Member
Nov 6, 2011
3,012
1,708
47
Vancouver Island, BC Canada
www.youtube.com
Soooooo, I got a Phiniac Tank made for me and thought it would be a great way to show my appreciation to Mopar and Canvape for saving me big money over the months and for being super cool to me and everyone else in here. Plus i think it looks pretty cool...........have i gone too far?? computer.gif LMAO!



 

zer0ith

Ultra Member
ECF Veteran
Verified Member
Mar 28, 2011
2,261
2,061
42
Burlington, Ontario
Soooooo, I got a Phiniac Tank made for me and thought it would be a great way to show my appreciation to Mopar and Canvape for saving me big money over the months and for being super cool to me and everyone else in here. Plus i think it looks pretty cool...........have i gone too far?? View attachment 83855 LMAO!





OMG that's awesome. How much was that?
If Adam would accept it I want to order him one as a show of appreciation
 
Status
Not open for further replies.

Users who are viewing this thread